Panasonic AG-DV2500 User Manual

E-47

The output mode for audio playback can be selected with the remote controller.

AUDIO MUTING
button

OUT SEL.
button

OUT LEV.
button

• The output channel for playback audio of

tapes recorded in the 32kHz mode can also
be set via the AUDIO OUT SEL item of the
AUDIO/VIDEO menu of the main unit.

• The audio output level can be set via the

AUDIO OUT LEVEL item of the AUDIO/
VIDEO menu.
(

☞

 Page 57 “AUDIO/VIDEO menu”)

䡵 To turn the audio muting function ON/

To  resume the audio output, press the button
again.

䡵 Selecting the audio output channel for

Each time the OUT SEL. button is pressed, the
channel changes in the following sequence:

• CH3/CH4 : CH3 audio is output via the CH1/3

AUDIO OUT terminal whereas
CH4 audio is output via the CH2/4
AUDIO OUT terminal.

• MIX

: Sounds mixed from CH1 and CH3

are output via the CH1/3 AUDIO
OUT terminal whereas Sounds
mixed from CH2 and CH4 are out-
put via the CH2/4 AUDIO OUT ter-
minal.

CH1/CH2           CH3/CH4           MIX

Depending on the sound source, noise may
occur in the MIX mode. In this case, please
use CH1/CH2 or CH3/CH4.

䡵 Select the output level for audio play-

Each time the OUT LEV. button is pressed, the
standard level for the output audio level changes.
(NORMAL or ATT)

• When the output level is set at ATT, the audio

output level is decreased by 8dB.

• To play back tapes recorded on this unit, set

the output level to NORMAL.