Panasonic D11 User Manual
7
RQT5210
Listening
3
2
4
5
7
6
1
1
3 5
2
4 6
7
Preset channel
Presetting radio broadcasts
•
Up to twelve FM and AM stations each can be programmed.
•
If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies.
tune in any of these frequencies.
•
You can preset just those stations you like.
1
Set [
] to “TUNER”.
2
Press [BAND] to select “FM” or “AM”.
Every time you press the button: FM
↔
AM
3
Press [MEMORY].
“
” and the frequency flash.
4
While “
” and the frequency are flashing:
Press [–/
g
] or [
f
/
+
] to select the desired
station.
“
” lights when an FM stereo program is being received.
Reference
You can select the desired broadcast by using “Automatic
tuning”. (See page 9.)
tuning”. (See page 9.)
5
Press [MEMORY].
“
” and the preset channel number flash.
6
While “
” and the preset channel number are
flashing:
Press [–/
Press [–/
g
] or [
f
/
+
] to select the preset channel.
7
Press [MEMORY].
If the “
” indicator goes off during programming, return to
step
3
.
Repeat steps
3
to
7
to program other stations.
RX-D11 only
When using the remote control
Preparation: Set [
] to “TUNER”.
1.
Press [BAND] to select “FM” or “AM”.
2.
Press [MEMORY/PGM].
3.
While “
” and the frequency are flashing:
Press [–/
g
] or [
f
/+] to select the desired station.
4.
Press [MEMORY/PGM].
5.
While “
” and the preset channel number are flashing:
Press [
3
] or [
4
] to select the preset channel.
6.
Press [MEMORY/PGM].
Repeat steps 2 to 6 to program other stations.