Clarion CX609 User Manual

CX609

 

3-1. Each time press the [

w] or [z] button to 

select the setting, the setting changes in 
the following order: 

“THROUGH” 

↔ “60” ↔ “90” ↔ “120”

∗ The factory default setting is 

“THROUGH

”.

● Adjusting the subwoofer output 

You can adjust the volume output from the unit’s 
subwoofer output terminal.

This adjustment can be performed only when 
the “REAR/S-W” is set to “S-WOOFER”.

2-1. Select “S-W VOL”.
3-1. Press the [

w] or [z] button to increases 

or decreases the subwoofer volume.

∗ The factory default setting is 

“0

”. 

(Adjustment range: +6 to –6)

● Adjusting the high pass filter

2-1. Select “HPF”.
3-1. Each time you press the [

w] or [z] button 

to select the setting.

The setting changes in the following order: 
“THROUGH” 

↔ “60” ↔ “90” ↔ “120”

∗ The factory default setting is “THROUGH” 

(through).

BBE MP (Minimized Polynomial Non-Linear 
Saturation) Process improves digitally 
compressed sound, such as MP3, by restoring 
and enhancing the harmonics lost through 
compression. BBE MP works by regenerating 
harmonics from the source material, effectively 
recovering warmth, detail and nuance.

∗ This fuction is effective for the audio files in the 

CD/MP3/WMA/AAC or USB/iPod mode, but it is 
ineffective for the video in the USB/iPod mode.

1. Press the [

] button to switch to the sound 

adjustment selection display.

2. Press the [

x] or [v] button to select 

“BBE MP”.

3. Press the [

w] or [z] button to select “ON” 

or “OFF”.

∗ The factory default setting is “OFF”. 

4. When you select “ON”, press the [

] 

button, then press the [

w] or [z] button to 

select as following order.

LOW 

↔ MID ↔ HIGH

CX609_ENG.book  Page 10  Tuesday, January 13, 2009  10:52 AM