Clarion CX609 User Manual

CX609

 

● AUTO ANS

This is a setting to determine whether any 
incoming call will be automatically or manually 
answered.

∗ The factory default setting is “OFF”.

2-1. Select “AUTO ANS”.

3-1. Press the [

w] or [z] button to select “ON” 

or “OFF”.

ON: Any incoming call is automatically 
answered in 5 seconds.

OFF: User needs to manually answer the 
call.

● AUTO CONNECT 

This function allows the Bluetooth to be 
connected automatically with previously 
connected device. Connection can be 
established at any source mode.

∗ The factory default setting is “OFF”.

2-1. Select “AUTO CON”.

3-1. Press the [

w] or [z] button to select “ON” 

or “OFF”.

ON: Automatic connection is enabled.

OFF: Automatic connection is disabled.

● PASS KEY

This PASS KEY is used during pairing mode. A 
maximum of 10 digits can be changed through 
the car stereo.

∗ The factory default PASS KEY is “1234”.

2-1. Select “PASS KEY”.

3-1. Press the [

] button.

4-1. Press the [

x] or [v] button to remove 

the cursor.

5-1. Press the [

w] or [z] button to select the 

desired digits.

6-1. Press and hold the [

] button (2 sec.) to 

store in memory.

∗ If press the [BND] button, the pass key 

returns to the factory default setting.

● ADDRESS 

This will hold the unique Bluetooth address. The 
address is 12 figures.

2-1. Select “ADDRESS”.

The Bluetooth address 6 figures appears in 
the display.

3-1. Press the [

w] or [z] button to display.

● Bluetooth Name

This will display the name of the Bluetooth.

2-1. Select “BT NAME”.

The Bluetooth name appears in the display.

● Bluetooth Firmware version

This will display the Firmware version of the 
Bluetooth.

2-1. Select “BT FW”.

The Bluetooth Firmware version appears in 
the display.

CX609_ENG.book  Page 20  Tuesday, January 13, 2009  10:52 AM