Clarion 430 User Manual

Some of the settings can be chosen from a short list of possible values. If the values 
can be described graphically, all values are available on the screen. 

 

Tap one of the icons to set/change the value. 

When the values in the list need to be named, only the current value is shown 
(sometimes together with a short description) in a horizontal stripe with arrows at 
both ends. 

 

The arrows are buttons. Tap 

 to move left in the list or tap 

 to move right. 

You need not confirm your selection. As soon as you leave the screen, the selected 
value becomes effective. 

When a feature has several different unnamed (numeric) values, N.I.C.E 430 will 
show sliders that look like analogue potentiometers to set the desired value. 

 

If the value limits are not displayed at the ends of the slider, the leftmost position 
means the minimum value, while the rightmost position represents the maximum 
value. 

With most sliders you can check the current value on the left. 

This control can be operated in two ways. Either drag the handle to move the slider 
to its new position, or tap the slider where you want the handle to appear (the thumb 
jumps there immediately). As with the list selectors, there is no need to confirm your 
selection. As soon as you leave the screen, the selected value becomes effective. 

When a function can only have two values (mainly Enabled and Disabled), a switch 
is used. Unlike with list selectors, the horizontal line contains the name of the 

 

12