EMC CX700 User Manual
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
29
Installing Optional Navisphere 6.X Software
Installing Optional Navisphere 6.X Software
You may need to add the following software:
◆
Navisphere Manager
◆
Access Logix
™
, SnapView
™
, MirrorView
™
, SAN Copy
™
, or
Analyzer options
To add the software, you will need to connect the laptop directly to
the SP LAN port. Use the 10BaseT crossover cable that shipped with
your system.
the SP LAN port. Use the 10BaseT crossover cable that shipped with
your system.
Connecting the Service Laptop to the SP LAN Port
Follow steps 1-4 to create a dedicated LAN connection between the
service laptop and the storage system.
service laptop and the storage system.
1. If necessary, connect an RJ45 adapter to the NIC card on the
laptop.
2. Connect the crossover cable from the service laptop to the LAN
port on SP A or SP B. Figure 11 shows this connection on a CX700
system.
system.
Figure 11
Connecting the Crossover Cable (CX700 Shown)
EMC229
LAN Cable
NIC Card