EMC CX500 User Manual
12
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
Initializing the Storage System
Initializing the Storage System
This section describes how to set critical startup parameters on the
storage system’s storage processors (SPs).
storage system’s storage processors (SPs).
Before you begin the initialization process, have the network
administrator at your facility assign IP addresses for the storage
system, and complete the following worksheet. You will need this
information to complete the system setup.
administrator at your facility assign IP addresses for the storage
system, and complete the following worksheet. You will need this
information to complete the system setup.
Table 2
Initialization Worksheet
SP A
SP B
Hostname
__________________________
__________________________
Up to 15 alphanumeric characters. Dashes are
acceptable. Special characters such as dots,
spaces, or underscores are not allowed.
Examples: Array1-A, Array1-B.
acceptable. Special characters such as dots,
spaces, or underscores are not allowed.
Examples: Array1-A, Array1-B.
IP Address
__________________________
__________________________
Subnet Mask
__________________________
__________________________
Gateway
__________________________
__________________________
Change Management Port settings on SP A and SP B
to EMC-specific assigned value for added security? YES____ NO____
to EMC-specific assigned value for added security? YES____ NO____