EAW MQV1364e User Manual
SPECIFICATIONS MQV1364e
FEATURES
PHYSICAL
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MQV1364e/0002689/002/2 pp October 2003
Printed in USA
FEATURES
DESCRIPTION
PERFORMANCE
APPLICATION
• Full-range, 3-way system
• 15-in LF; 10-in horn-loaded MF; 2-in exit Neodymium HF
• 60° x 40° beamwidth
• Horizontally configured to create vertical arrays
• 15-in LF; 10-in horn-loaded MF; 2-in exit Neodymium HF
• 60° x 40° beamwidth
• Horizontally configured to create vertical arrays
A 3-way, full-range system in a vented trapezoidal enclosure.
Includes a slot-loaded 15-in woofer, a horn-loaded 10-in MF
cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm
Neodymium compression driver. The MF and HF horns provide
a nominal 60° x 40° beamwidth. An internal passive crossover
with jumpers on the input panel allows user selection of
either bi-amplified or passive operation. In either case digi-
tal signal processing is required to achieve specified perform-
ance. The enclosure features a comprehensive system of 3/8”-
16 threaded suspension points.
Includes a slot-loaded 15-in woofer, a horn-loaded 10-in MF
cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm
Neodymium compression driver. The MF and HF horns provide
a nominal 60° x 40° beamwidth. An internal passive crossover
with jumpers on the input panel allows user selection of
either bi-amplified or passive operation. In either case digi-
tal signal processing is required to achieve specified perform-
ance. The enclosure features a comprehensive system of 3/8”-
16 threaded suspension points.
The MQV1364e combines the MQ Series LF/MF/HF components
into a full-range, single-enclosure loudspeaker. It is horizon-
tally configured for arraying in vertical columns. This arrange-
ment is typically used in sports arenas and other venues where
the array must address wide, vertical audience angles. The
MF/HF horns in the MQV1364e feature a rigid but well-damped
construction using wood veneer backed by structural foam. A
no-compromise design means the mid and high frequency
horns are truly large enough to provide optimal pattern con-
trol throughout each passband.
into a full-range, single-enclosure loudspeaker. It is horizon-
tally configured for arraying in vertical columns. This arrange-
ment is typically used in sports arenas and other venues where
the array must address wide, vertical audience angles. The
MF/HF horns in the MQV1364e feature a rigid but well-damped
construction using wood veneer backed by structural foam. A
no-compromise design means the mid and high frequency
horns are truly large enough to provide optimal pattern con-
trol throughout each passband.
Application Usage: Install
Houses of Worship
Auditoriums Theatres
Performing Arts Centers Arenas
Stadiums
Calculated Maximum Output (dB SPL @ 1m)
LF Peak/Long Term
128/122
MF/HF Peak/Long Term
141/135
MF Peak/Long Term
141/135
HF Peak/Long Term
135/129
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal
60
Vertical
40
Recommended High-Pass Frequency
24 dB/Octave
50 Hz
Frequency Response
±3 dB
70 Hz to 15 kHz
-10 dB
50 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF
95
MF/HF
109
MF
109
HF
107
Impedance (Ohms)
LF
8
MF/HF
8
MF
8
HF
8
Power Handling, AES Standard (Watts)
LF 550
MF/HF
400
MF
400
HF
150
LF Subsystem
1x 15-in woofer
MF Subsystem
1x 10-in horn loaded cone
HF Subsystem
2-in exit/3-in diaphragm com-
pression driver on constant
directivity horn
pression driver on constant
directivity horn
Configuration
Three-way, full range
Powering
Bi- or Tri-amplified
Enclosure Materials
Exterior grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors
Terminal barrier strip
Suspension Hardware
16x 3/8”-16 threaded mounting
points (4 each on top, bottom
and sides)
points (4 each on top, bottom
and sides)
Grille
Powder coated perforated steel
Dimensions inches
millimeters
Height (front)
26.65
677
Height (rear)
15.3
389
Width
56.25
1429
Depth
25.59
650
Trapezoid Angle
12.5 Degrees per Side
Weights
pounds
kilograms
Net Weight
215
97.7
Shipping Weight
240
109.1