Casio 2707 User Manual

3

The Alarm Mode gives you a choice of four one-time
alarms and one snooze alarm. You can select either an
audible beeper or flashing silent alert to let you know
when any of the alarm times is reached.
You can also input reminder text that appears when the
alarm time is reached.
Also use the Alarm Mode to turn the Hourly Time Signal
on and off.
• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Alarm time

Alarm on indicator

Alarm screen
name

Alarm name
indicator

To display Alarm Mode screen
In the Alarm Mode, use D to cycle through the alarm screens as shown below.

• The following alarm screen names appear in the center

of the display to indicate the alarm whose screen is
currently displayed.
ALARM1 through ALARM4: One-time alarm screen
SNOOZE: Snooze alarm screen
SIGNAL: Hourly Time Signal screen

• The currently displayed alarm screen is also indicated

by the alarm name indicators along the bottom left of the
watch's display.

Alarm1

Alarm2

Alarm3

Alarm4

Snooze

1. In the Alarm Mode, use D to select the alarm whose

time you want to set.

2. Press B and the hour setting of the alarm time starts

to flash, which indicates the setting screen.
• Pressing A and D at the same time resets the

alarm time to 12:00 AM, and clears the reminder text
in the upper part of the display (if there is any).

3. Press C to move the flashing in the sequence shown

below to select other settings.

• Selecting the text causes the text input cursor to appear. You can input up to eight

characters of reminder text for each alarm.

• There are eight spaces in the text, so you have to press C eight times to move to

the Hour setting.

4. When the setting you want to change is selected, use A and D to change it.

• While the hour or minute setting is flashing, use D (+) and A (–) to change it.
• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

• When inputting text, use A and D to cycle through characters at the current

cursor location, and C to move the cursor to the right. See “Inputting Text” for
more information.

5. Press B to exit the setting screen.
• If you input reminder text, the text appears in place of the alarm screen name when

you exit the setting screen.

• If the reminder text has more than six characters, it will scroll from right to left

whenever it is displayed.

Minutes

Hour

Text

l l l l

ll

ll

ll

l l

Alarm Operation
The following table describes the different types of alarm operations that this watch
can perform.

Alarm off

Alarm on

Alert on

• Nothing happens when the alarm

time is reached.

• The alarm on indicator and alarm

name indicator flash on the display
for 10 seconds.

• The watch beeps for 10 seconds.
• The alert on indicator and alarm

name indicator flash on the display
for 10 seconds.

• The watch does not beep.

Snooze
indicator

Alert on
indicator

Alarm on indicator

• Press any button to stop the alarm after it starts to sound.
• If any alarm operation (one-time alarm, silent alert, snooze) occurs while a signal

receive operation is in progress, the receive operation is canceled.

• In the case of the snooze alarm, the alarm operation repeats up to seven times

every five minutes until the alarm is turned off.

• If you input reminder text for an alarm, the text appears for one minute in place of

the date on the Timekeeping Mode screen. The text is cleared from the Timekeeping
Mode screen if you change to another mode while it is displayed.

• Alarm operations and the Hourly Time Signal operation are performed in all modes.

To test the alarm
In the Alarm Mode, hold down D to sound the alarm.

To select the alarm operation type
1. In the Alarm Mode, use D to select the screen for the alarm (ALARM1 to

ALARM4, or SNOOZE) whose alarm type you want to select.

2. Press A to cycle through the available settings in the sequence shown below.

Alarm on

Alarm off

Alert on

• The alarm on indicator (         ) and alarm name indicator are displayed for each

alarm (1 through 4, snooze) for which alarm on is set. The alert on indicator

   (         ) and alarm name indicator are displayed for each alarm (1 through 4,

snooze) for which alert on is set.

• In other modes besides the Alarm Mode, the alarm name indicator is displayed for

each alarm for which alarm on is selected.

• In all modes, the alarm on indicator or alert on indicator is shown for any alarm

(ALARM1 through ALARM4, or SNOOZE) that is currently turned on.

1. In the Alarm Mode, use D to select the Hourly Time

Signal (SIGNAL).

2. Press A to toggle it on (SIG displayed) and off (SIG

not displayed).

• The Hourly Time Signal on indicator (SIG) is shown on

the display in all modes while this function is turned on.

You can use the watch’s data memory to store e-mail
addresses, Web page URLs, and other text data.
• All of the operations in this section are performed in the

Data Memory Mode, which you enter by pressing C.

Data Memory Records
Each data memory record can contain up to 63
characters. Records are stored in memory in the
sequence they are created.
• The number of records you can store in data memory

depends on the number of characters that make up
each record. See “Data Memory Management” for more
information.

Remaining memory

1. In the Data Memory Mode, press A and D at the

same time to display the remaining memory screen.
• You do not have to perform the above step if the

remaining memory screen is already on the display.

• If REST 0% is shown for remaining memory, it means

that memory is full. To store another record, you will
first have to delete some of the records stored in
memory.

2. Press B and the flashing cursor appears on the

display, which indicates the setting screen.

3. Use A and D to cycle through characters at the

current cursor location, and C to move the cursor to
the right. See “Inputting Text” for more information.
• If memory becomes full while you are inputting text,

the cursor will jump to the first (leftmost) character of
the text when you press C, instead of advancing to
the right.

4. Press B to store your data and return to the data

memory record screen (without the cursor).

• The message SAVE! appears for about two seconds,

followed by a data memory record screen, which shows
the text you just input in the upper part of the display,
and a record number automatically assigned by the
watch in the lower part of the display.

• While the record number is in the lower part of the

display, you can see only six characters of the text in the
record. You can scroll through the text on the screen by
pressing D. See “To recall data memory records” for
more information.

Cursor

l ll

lll

ll

l

Record number

Text

To recall data memory records
1. In the Data Memory Mode, press A to scroll forward through data memory records.

• Each press of A advances to the next record and shows its record number and

first six characters of its text.

• Pressing A while the last record in memory is on the display changes to the

remaining memory screen. Pressing A again displays the first record.

2. Press D to scroll through the text on the screen.

• An end mark indicates the end of the text.

▲

▲

First six characters

Pressing D scrolls through the text.

End mark

To edit a data memory record
1. In the Data Memory Mode, display the record you want to edit.
2. Press B and the flashing cursor appears on the display.
3. Press C to move the flashing to the character you want to change.
4. Use D and A to change the character.
5. After making the changes you want, press B to store them and return to the data

memory record screen.

To delete a data memory record
1. In the Data Memory Mode, display the record you want to delete.
2. Press B and the flashing cursor appears on the display.
3. Press A and D at the same time to delete the record.

• The message CLEAR! appears to indicate that the record is being deleted. After

the record is deleted, the cursor appears on the display, ready for input.

4. Input data or press B to return to the remaining memory screen.