Panasonic WX-LT100 User Manual

Page of 2
 Key Features
 (WX-LP100)
 • 
Integrated dual channel infrared wireless receiver
 • 
2 audio multimedia inputs
 • 
Remote control of wireless microphones and multimedia sources
 • 
Wide horizontal dispersion for even coverage
 • 
Compact, lightweight and rugged design for flexible placement
 • 
Interference/interception-free made possible by infrared  
   
wireless technology
 • 
Front panel controls for easy access
 • 
Adjustable output for recording
 • 
Adjustable output for assistive listening devices
Part Names and Functions
 (WX-LP100)
DISTRIBUTED BY:
• 
All TV pictures are simulated. 
 
• Weights and dimensions are approximate. 
• Specifications are subject to change without notice. 
• These products may be subject to export control regulations.  
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
http://panasonic.net/pss/irw/
Printed in Japan (1N-790)
Appearance
 (WX-LP100)
Rear Panel
Front Panel
Specifications
 (WX-LP100)
Infrared Wireless Powered Speaker Kit
Optional Accessory
Infrared Wireless 
Powered Speaker
WX-LP100
All-in one portable speaker 
incorporating 2ch receiver, 
sensor, amplifier and speaker.
Hands-free pendant-style.
Equipped with volume 
control buttons. Ideal for 
teachers’ or presenters’ use.
* Shipped with 
  strap attached.
* Comes with two 
  WX-LT100 adaptors. 
  Photo shows adaptor 
  attached on left side.
Microphones; 
option
Light weight, simple and 
basic design. 
Ideal for students’ 
or audiences’ use.
Direct connection. 
Allows simultaneous charging 
of two microphones. 
Can also serve as power cord 
for the charger stand.
Can charge batteries in approx. 
seven hours. Two microphones 
can be charged at the same time.
Infrared Wireless Microphone
(Pendant Type)
WX-LT310
Infrared Wireless Microphone
(Hand Held Type)
WX-LT100
Battery Charger
WX-LZ110
Charger Stand
WX-LZ10
Amplifier/Receiver Unit 
Power Source 
24 V DC (Using the attached AC adaptor unit)
Power Consumption 
450 mA
Infrared Sensor Input 
75 
Ω F type connector (with Sensor WX-LS100)
 
Output power for Sensor: 22 V DC, 100 mA Max.
Receiving Channel  
Ch1: 2.3 MHz, Ch2: 2.8 MHz    
(Sub Carrier Frequencies) 
Receiving System 
TRF (Tuned Radio Frequency)
Squelch Level 
24 dB
µV (including Sensor)
Tone Squelch Frequency 
32.768 kHz
Line Input 1, 2 
-12 dBV, unbalanced, ø3.5 mini jack 
(L and R mixing for stereo input)
Line Output 
0 dBV, unbalanced, ø3.5 mini jack
(Monaural audio output for L and R)
Volume Control*
changeable microphone volume by the 2 dB step 
(+6 dB ~ -16 dB) (Reset by power OFF/ON)  
Speaker Type 
12 cm Full Range Bass Reflex
Rated Output 
6.3 W (4 
Ω), Max: 10 W (4 Ω)
SPL 
93 dB SPL, 1 m, 1 W
Distortion 
Less than 1 %
Frequency Response 
100 Hz ~ 15 kHz (Line input ~ Speaker output)
Operating Temperature 
+5 
°C ~ +35 °C
Dimensions 
187 (W) x 309 mm (H) x 209 mm (D)
Weight 
approx. 3.7 kg
Finish 
AV medium gray ABS resin (similar to Munsell N7)
* Volume controllable Microphone: WX-LT310 
Infrared Sensor (attached) 
Power Source 
22 V DC (supplied from Amplifier/Receiver unit)
Power Consumption 
20 mA
Infrared Ray Wavelength 
850 nm
Sensor Output 
75 
Ω F type connector
Receiving Channel
Ch1: 2.3 MHz, Ch2: 2.8 MHz
 (Sub Carrier Frequencies) 
Dimensions 
Max. ø113.5 mm x 34.5 mm (H)  
(excluding a projection for F type connector)
Weight 
approx. 0.2 kg
Finish 
Black color / Infrared ray transmission acrylic resin
187
209
65
244
Unit: mm
Sensor Input
Line Input 2
Line Input 1
Line Output
Line Output Volume Control
OPERATE
MIC 1 Volume Control
MIC 2 Volume Control
LINE 1 Volume Control
LINE 2 Volume Control