Tapco 6918s User Manual

Getting Started

The following steps will 
help you set up your 
loudspeakers quickly. 

1.  Make all initial connections with the power 

switches OFF on all equipment. Make sure the 
master volume, level, or gain controls are all the 
way down.

.  Connect the line-level outputs from your mixing 

console (or other signal source) to the inputs of 
your power amplifier.

3.  Connect the “Speaker Output” from your 

power amplifier (or powered mixer) to the INPUT 
connector on the Series 69 (1/4" or Speakon jack).

4.  If you are using the 6918s subwoofer with one of 

the full-range loudspeakers, connect the 1/4" OUT 
or the Speakon LINK EXTENSION to the subwoofer’s 
input.

5.  Turn on your mixing console (or other signal 

source).

6.  Turn on the amplifier. Turn up its volume or gain 

control(s) as recommended by the manufacturer.

7.  Start the signal source, whether it be speaking 

into a microphone or starting a CD player. Adjust 
the volume controls on the mixer (or other signal 
source) for normal operation.

695
•   Mackie-designed 2-way full-range loudspeaker
•   1” HF compression driver
•   Dual 15” high-precision LF drivers, vented
•  Built-in HF driver protection circuitry
•   600 watts continuous power handling
•   8 ohm impedance
•   Speakon™ and 1/4” inputs
•   Rugged composite vinyl covering
•  Protective corner bumpers

6918s
•   18” subwoofer
•   450 watts continuous power handling
•   8 ohm impedance
•   Speakon™ and 1/4” inputs
•   Durable painted enclosure
•  Pole mount socket on top of enclosure