B&C Speakers DE200 User Manual

100 W continuous program  power capacity

1” horn throat diameter

44 mm (1.7 in) aluminium voice coil

Titanium diaphragm

1000 – 18000 Hz response

106 dB sensitivity

Throat Diameter (1)

25 mm (1 in)

Nominal Impedance (2)

8 ohm

Minimum Impedance

7.5 ohm

Nominal Power Handling (3)

50 W

Continuous Power Handling (4)

100 W

Sensitivity (1W/1m) (5)

106 dB

Frequency Range

1 -18 kHz

Recommended Crossover (6)

1.6 kHz

Voice Coil Diameter

44 mm (1.7 in)

Winding Material

Aluminium

Inductance

0.11 mH

Diaphragm Material

Titanium

Flux Density

1.5 T

Two M5 holes 180° on 76 mm (3

in) diameter
Three M6 holes 120° on 57 mm

(2.2 in) diameter
Overall  Diameter

102 mm (4.0 in)

Depth

61 mm (2.4 in)

Net Weight (1 unit)

1.7 kg  (3.7 lb)

Shipping Weight (8 units)

14.6 kg  (32.1 lb)

Shipping Box (8 units)

230x230x160 mm

(9x9x6.3 in)

1

Driver mounted on B&C ME45 horn

2

Also available in 16 ohms, data upon request

3

2 hours test made with continuous pink noise signal (6 dB crest factor)

within the specified range . Power calculated on  rated minimum

impedance.

4

Power on Continuous Program is defined as 3 dB greater than the

Nominal rating.

5

Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

6

12 dB/oct. or higher slope high-pass filter.