Anchor Audio AN-130 User Manual

GETTING STARTED ................................................................................................................................................. 2
FEEDBACK ............................................................................................................................................................... 3
WIRELESS REMOTE CONTROL ................................................................................................................................ 3
BASIC SYSTEM OPERATION .................................................................................................................................... 4
AN-130 ACCESSORIES .......................................................................................................................................... 4/5
OPERATING THE BUILT-IN UHF WIRELESS RECEIVER ........................................................................................... 6
OPERATING THE WIRELESS MICROPHONE / TRANSMITTER ................................................................................. 7
HAVING TROUBLE W/ YOU SOUND SYSTEM? ........................................................................................................ 8
AN-130 TECHNICAL SPECIFICATIONS .................................................................................................................... 8

No Sound (Power LED Not Lit) 

• turn POWER switch on

 

• plug in power cord

No Sound (Power LED Lights) 

• check for output from source

 

• make sure all cables are completely plugged in

 

• increase volume control

 

• press mute button on remote (AN-130RC only)

 

• turn power switch to off then back to on (AN-130RC only)

Distorted Sound 

• check input cable connection

 

• lower input signal level

Excessive Hum or Noise 

• use shielded input cables

No Sound 

• confirm transmitter power switch is set to on

 

• turn up volume control

 

• plug microphone into body-pack transmitter

 

• turn sound system on

 

• replace mic/transmitter battery

 

• make sure hands free mic cable is fully plugged into transmitter

 

• turn off mute by pressing, volume up/down or mute (AN-130RC only)

Frequent Transmitter Dropouts 

• replace mic/transmitter battery

 

• move mic/transmitter closer to AN-130

 

• change transmitter to different channel

Portable Sound Systems  •  Torrance, California

100-0154-000/A- 12/06

Rated Power Output  30 watts
Max SPL @ Rated Power 101 dB @ 1 meter
Frequency Response  65 Hz – 18 kHz ± 3 dB
Speaker Type 

4.5” woofer, 10 mm dome tweeter

AC Power Reqs. 

110 - 125 VAC, 50/60 Hz

      Export Model 

208 - 240 VAC, 50/60 Hz (50W max)

Fuse Rating 

T 1.0A / 250V

      Export Model 

T 0.5A / 250V (internally mounted)

Dimensions (HWD) 

5.25 x 8.4 x 9” / 13 x 21 x 23 cm

Weight 

8.5 lbs / 3.8 Kg

Inputs
Line (2) 

Hi-Z, unbalanced, RCA (summing L+R)

Microphone 

Lo-Z, unbalanced, 1/4” phone

Output
Line 

Lo-Z, buffered, 1/4” phone

Sensitivity For Rated Output
Line 

-20 dBV (100 mVrms)

Microphone 

-43 dBV (7.5 mVrms)