Sony D-NS505 Manual

Page of 28
Maintenance
To clean the casing
Use a soft cloth slightly moistened in water or 
a mild detergent solution.  Do not use alcohol, 
benzine or thinner.
To clean the headphones/
earphones plug
Keep the plug of your headphones/earphones 
clean to obtain optimum sound. Wipe it with a 
dry, soft cloth.
To remove any dust or 
sand from the rubber 
packing
Any sand or dust on the rubber packing will 
prevent the lid from shutting tightly, and 
water may leak in. Brush off the dust once in 
a while.
We recommend the replacement of the 
rubber packing every year which is available 
optionally at an authorized Sony service 
facility.
Specifications
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: 
λ = 770 - 800 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance 
of 200 mm from the objective lens surface on the 
optical pick-up block with 7 mm aperture.)
D-A conversion
1-bit quartz time-axis control
Frequency response
20 - 20 000 Hz 
+1
–2
 
dB (measured by JEITA)
Output (at 4.5 V input level)
Headphones (stereo minijack)
Approx. 5 mW + Approx. 5 mW at 16 
Ω
Power requirements
•  LR6 (size AA) batteries: 1.5 V DC × 2
•  AC power adaptor (DC IN 4.5 V jack):
  120 V, 60 Hz
Operating temperature
5°C - 35°C (41°F - 95°F)
Dimensions (w/h/d) (excluding projecting parts 
and controls)
Approx. 136  × 30.5 × 136 mm (5
3
8
 × 1
1
4
 × 5
3
8
 in.)
Mass (excluding accessories)
Approx. 250 g (8.9 oz.)
US and foreign patents licensed from Dolby 
Laboratories.
Design and specifications are subject to change 
without notice.
D-NS505.US.3-267-207-11(1)
24
Additional Information
D-NS505.US.3-267-207-11(1)
25