iLive 0915-0820-09 User Manual

█ USING THE AUXILIARY INPUT
1.  Connect an MP3 Player or other audio

source to the Auxiliary Input.

2.  Press the Power Button to turn the unit

on.

3.  Press the Source Button to switch the

unit to Aux Mode.
Use the connected device’s controls to

control the audio playing through the unit.

█ TUNING THE AM/FM RADIO
1.  Press the Power Button to turn the unit

on.

2.  Press the Source Button to switch the

unit to Tuner Mode. "Tuner" will appear

on the LCD Display, indicating that the

unit is in Tuner Mode.

3.  Press the Source Button to switch to AM 

or FM radio mode.

4.  Press the Skip/Tune Buttons to tune the

AM or FM radio stations.

5.  Press and hold the Skip/Tune Buttons for 

3 seconds to search for a receptive AM or

FM radio station.

6.  Press the St./Mono Button to turn the

FM Stereo Mode off and on .

7.  Adjust the FM Wire Antenna to improve 

FM radio reception. An AM antenna is

built into the unit. Adjust the position of

the unit to improve AM radio reception.

1.  Tune the AM/FM Radio to the desired

station.

2.  Press the Mem/Clk Adj Button.
3.  Press the Stop/Mem+ Button to select

a memory channel for the current radio

station.

4.  Press the Mem/Clk Adj Button.
5.  To cycle through saved radio stations,

Press the Stop/Mem+ Button.

█ SETTING THE CLOCK
1.  Press the Power Button to turn the unit

off.

2.  The Power Indicator Light will 

illuminate red, indicating that the unit is

in Standby Mode.

3.  Press the Mem/Clk Adj Button.
4.  The Hour will begin to blink.
5.  Press the Skip/Tune Buttons to adjust

the hour.

6.  Press the Mem/Clk Adj Button to set the

hour.

7.  The Minute will begin to blink.
8.  Press the Skip/Tune Buttons to adjust

the minute.

9.  Press the Mem/Clk Adj Button to set the

minute, and finish setting the clock.

█ SETTING THE TIMER
1.  To set the timer, you must first go through

the steps of Setting the Clock.

2.  After the clock is set, "Timer" will appear

on the LCD Display and the timer hour

will begin to blink, indicating that you are

now editing the timer.

3.  Press the Skip/Tune Buttons to adjust

the hour.

4.  Press the Mem/Clk Adj Button to set the

hour.

5.  The Minute will begin to blink.
6.  Press the Skip/Tune Buttons to adjust

the minute.

7.  Press the Mem/Clk Adj Button to set the

minute, and finish setting the timer.

8.  After setting the timer, press and hold

the Mem/Clk Adj Button to activate 

the timer. The word "Timer" will appear

on the LCD display once the timer is

activated.