Philips DC1000 Quick Setup Guide
C
2
Enjoy
Troubleshootting
Problem
Solution
No sound
No any response after
pressed the buttons on the
2-way remote control
pressed the buttons on the
2-way remote control
Sound can't be adjusted
• Check if the audio cable is well connected.
• Check if the power cable that connects the DC1000 with
• Check if the power cable that connects the DC1000 with
WACS7000 is well connected.
• Check if the 2-way remote control is at "Portable" mode.
Press the Portable button to switch it to Portable mode.
• Point the remote control to the docking station.
• Once entering Portable mode, the 2-way remote control
• Once entering Portable mode, the 2-way remote control
works with the DC1000. Do not point the remote control to
WACS7000 or your iPod or GoGear.
WACS7000 or your iPod or GoGear.
• Check if the batteries of the remote control is used up. If yes,
replace it with new batteries.
• Only the Volume button, Skip/search button and Play/pause
button is applicable. (see Enjoy section for details.)
• Check if the audio cable is properly connected: the audio cable
should be connected to the black 3.5mm jack in the middle of
the backside of the docking station.
the backside of the docking station.
Specifications
Dock Connectivity
– Audio Out : 3.5 mm (Cable provided)
– AV Out: 3.5 mm for Audio/Video Out (Cable optional )
– DC in for GoGear and iPod : 9 pins DIN cable(Cable provided)
– USB: Mini USB (Cable optional )
– Remote Control: IR build-in
– AV Out: 3.5 mm for Audio/Video Out (Cable optional )
– DC in for GoGear and iPod : 9 pins DIN cable(Cable provided)
– USB: Mini USB (Cable optional )
– Remote Control: IR build-in
Charging iPod using the docking station
When the iPod is properly connected on the docking cradle and the WACS7000 is powered
on, battery charging start automatically.
on, battery charging start automatically.
Helpful hint:
• You can also use a USB cable (not supplied) to connect the docking cradle with your PC to
charge your iPod or GoGear