ONKYO DS-A5 User Manual

You can restore the DS-A5 to default settings.
Perform this when the needs to restore the DS-A5’s 
name, volume value and network settings arise.

• Make sure your iPod/iPhone/iPad is connected 

properly.

• If there’s no video, make sure your 

iPod/iPhone/iPad supports TV out.

• Make sure your iPod/iPhone/iPad is playing.
• Make sure your amp or AV receiver is turned on, the 

input to which the DS-A5 is connected is selected 
as the input source, and the volume control is not 
set to minimum.

• Make sure all plugs are pushed in all the way.
• Make sure the DS-A5 is connected to the correct 

input jacks on your amp or AV receiver. If there’s no 
video, check your video connections. Do not 
connect the DS-A5 to any jacks on your amp or AV 
receiver labeled OUT.

• Make sure the AC adapter is properly connected to 

the DS-A5 and a suitable wall outlet.

• Try resetting your iPod/iPhone/iPad.

Press the Repeat button on the remote 
controller for 10 seconds.
LED blinks in blue and green alternately, and the 
DS-A5 goes into default setting mode.

Press the Mute button on the remote 
controller for two seconds.
The DS-A5 goes into standby status and LED 
turns off a light. The setting is restored to the 
default settings.

• Unless Mute button is pressed within 30 

seconds after LED blinks in blue and green 
alternately, the default setting mode 
terminates.