Curtis pmn User Manual

- 

6 -

Remove the stereo carefully from the box, retaining the packaging for future use.

Read these instructions carefully before use.

Before switching on your stereo system, ensure that it is connected as follows:

Connect the speakers to the speaker sockets on the back of the music system.


Connect the left speaker to the left speaker socket and the right speaker to the right
speaker socket.



Connect the Mains Lead to an AC outlet.



Insert two AAA batteries into the battery compartment of the remote controller.

You are now ready to switch on the power.



The product shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the product.



The normal ventilation of the product must not be blocked.



Press the STANDBY/ON Button to turn the unit on, the Stand-By indicator will go off.

 Set the FUNCTION Selector to the tuner position and the radio band selector to 

AM

or FM position.



Tune into the station using the TUNING knob.



Adjust the VOLUME to the desired level using the VOLUME Control Knob.



To turn off the radio, press the STANDBY/ON Button.



Press the MUTE Button on the remote control to switch off the sound, the MUTE
indicator will light up.



Press MUTE again to restore the sound to the previous level.  MUTE indicator will go off.

This unit is equipped with a preset equaliser which has been added to enhance your
listening pleasure by altering the frequency response of the music to give it a different feel.
Press the PRESET EQ Button repeatedly to cycle through the following equalization
modes.

This unit is equipped with a preset equaliser which has been added to enhance your
listening pleasure by altering the frequency response of the music to give it a different feel.
Press the PRESET EQ Button repeatedly to cycle through the following equalization
modes.