Insignia NS-CLBT02 User Manual
14
NS-CLBT02 Digital Clock Radio with Bluetooth
www.insigniaproducts.com
Charging a device’s battery
You can use the USB port on your radio to charge a connected device’s
battery.
battery.
To charge a device’s battery:
•
•
Connect a USB cable (not provided) to the USB port on your radio and
to the USB port on the device.
to the USB port on the device.
Troubleshooting
Problem
Possible cause
Possible solution
My Bluetooth device will not pair
with my radio.
with my radio.
Bluetooth is not selected as the audio
source on your radio.
source on your radio.
Press
(source) repeatedly until
Bluetooth
appears on the LCD.
Your radio is not in pairing mode.
Press and hold
Pair/Preset for six seconds.
Your Bluetooth device is too far away
from your radio.
from your radio.
Make sure that your Bluetooth device is within
33 feet (10 meters) of your radio.
33 feet (10 meters) of your radio.
Your Bluetooth device is not in
pairing mode.
pairing mode.
Make sure that your Bluetooth device is in
pairing mode. See the instructions that came
with your device.
pairing mode. See the instructions that came
with your device.
The battery level on your Bluetooth
device may be too low.
device may be too low.
Charge the battery on your Bluetooth device,
then try pairing again.
then try pairing again.
Another paired Bluetooth device is
too close to your raido.
too close to your raido.
Another paired Bluetooth device that is too
close to your radio (such as a cell phone paired
to a headset) can interfer with pairing. Move
the other paired device away from your radio or
turn off the other paired device.
close to your radio (such as a cell phone paired
to a headset) can interfer with pairing. Move
the other paired device away from your radio or
turn off the other paired device.
Your Bluetooth device may not use a
supported Bluetooth protocol.
supported Bluetooth protocol.
Your radio supports the A2DP and AVRCP
Bluetooth protocols. Check the documentation
that came with your device to determine if it
uses a supported protocol.
Bluetooth protocols. Check the documentation
that came with your device to determine if it
uses a supported protocol.
My radio is in pairing mode, but
does not pair with my Bluetooth
device.
does not pair with my Bluetooth
device.
Your Bluetooth device may not be
turned on.
turned on.
Make sure that your Bluetooth device is turned
on.
on.
You have not selected your radio on
the Bluetooth device.
the Bluetooth device.
Make sure that your Bluetooth device is in
pairing mode, then select
pairing mode, then select
NS-CLBT02 on your
Bluetooth device. See the instructions that
came your the Bluetooth device.
came your the Bluetooth device.
Your Bluetooth device is too far away
from your radio.
from your radio.
Make sure that your Bluetooth device is within
33 feet (10 meters) of your radio.
33 feet (10 meters) of your radio.
SRC