Insignia NS-CLOPP2 User Manual
16
NS-CLOPP2
www.insigniaproducts.com
Clean your clock radio
•
Use a soft, dry, clean cloth to clean the exterior of your
clock radio.
clock radio.
•
Do not let liquid drip into the inside of your clock radio.
•
For stubborn stains, use a soft cloth dampened with a
weak solution of mild detergent and water. Dry your
clock radio immediately afterwards with a clean cloth.
Do not use abrasive clothes, thinners, alcohol, or other
chemical solvents, because they may damage the finish
or remove the panel lettering.
weak solution of mild detergent and water. Dry your
clock radio immediately afterwards with a clean cloth.
Do not use abrasive clothes, thinners, alcohol, or other
chemical solvents, because they may damage the finish
or remove the panel lettering.
Troubleshooting
Problem
Cause/Solution
No power
•
Make sure the AC power adapter is connected
securely and correctly to the power outlet.
securely and correctly to the power outlet.
•
Make sure that the power outlet is working.
No sound
from the
speakers
from the
speakers
•
Press VOL +/
to increase the volume.
•
Make sure that the AC power adapter is
connected securely and correctly to the power
outlet.
connected securely and correctly to the power
outlet.
•
Make sure that your clock radio is turned ON.
Static or noise
when playing
the radio
when playing
the radio
•
Make sure that the station is tuned correctly and
that the station has a good signal.
that the station has a good signal.
•
Try another station.
•
For FM stations, extend the antenna wire to
improve the reception.
improve the reception.
•
For AM stations, adjust the position of your clock
radio for best reception.
radio for best reception.
The sound is
distorted
distorted
•
Make sure that the volume level is not set too
high.
high.
•
Make sure that the station is tuned correctly and
that the station has a good signal.
that the station has a good signal.
NS-CLOPP2_14-0195_MAN_V3_ENG.fm Page 16 Monday, April 14, 2014 12:09 PM