Nexus 21 TH52 User Manual
Sea Data Set TH52
English
9
2.2
Installing the WSI-box
Remove the WSI-box cover from the base plate by removing the
screw. Drill the 3 screw holes using a 2.8 mm (0.11") drill. Mount
the WSI-box using the 3 mounting screws.
Apply silicon paste on the screw terminal. Connect the 8 m Nexus
Network cable supplied with cable protectors to the WSI-box on
pins 13, 14, 15, and 16. Match the colour codes for each wire.
screw. Drill the 3 screw holes using a 2.8 mm (0.11") drill. Mount
the WSI-box using the 3 mounting screws.
Apply silicon paste on the screw terminal. Connect the 8 m Nexus
Network cable supplied with cable protectors to the WSI-box on
pins 13, 14, 15, and 16. Match the colour codes for each wire.