RCA RC85I Leaflet

• ADDITIONAL SAFETY

INFORMATION

• The AC/DC adapter supplied with

this product is intended tto be
correctly oriented in a vertical or
fl oor mount position.

• Do not use unauthorized chargers

or power adapters. Use only
chargers or power adapters that
came with your product or that is
listed in the user’s guide.

• Apparatus shall not be exposed to

dripping or splashing and no objects
fi lled with liquids, such as vases,
shall be placed on the apparatus.

• Always leave suffi cient space around

the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air fl ow through vent
openings.

• Do not place lighted candles,

cigarettes, cigars, etc. on the
product.

• Connect power cord only to AC

power source as marked on the
product.

• Care should be taken so that objects

do not fall into the product.

• Do not attempt to disassemble

the cabinet. This product does
not contain customer serviceable
components.

• The marking information is located

at the bottom of apparatus.

• Caution marking is located at

bottom of apparatus.

• To be completely disconnect the

3. Press or

to select a preset

station and press OK to confi rm.

Radio step frequency
change

In FM/AM radio mode, press OPTION
and

to access “FM step” or

“AM step” items (depends on what
the current radio band is). Select the
desired step frequency and press OK for
confi rmation.

Antenna

Built-in AFC
The Built-in Automatic Frequency
Control (AFC) works only on FM. It helps
reducing drift on FM reception and
keeping the radio locked in on the FM
station to which it is tuned.

AM Antenna
For AM reception, connect the AM
antenna loop to the back of the radio.
Stretch out the antenna cord to its
fullest length and rotate the antenna
for better reception.

the provided plug
does not fi t into
your outlet, consult
an electrician for
replacement of the
obsolete outlet.

• Protect

the

power cord from being walked on
or pinched particularly at plugs,
convenience receptacles, and the
point where they exit from the
apparatus.

• Only use attachments/accessories

specifi ed by the manufacturer.

• Use only with the cart, stand,

tripod, bracket, or table specifi ed
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.

• Unplug this apparatus during

lightning storms or when unused
for long periods of time.

• Refer all servicing to qualifi ed

service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.

5. Press or

to select the sleep

mode from radio, music (USB or
memory card) and iPod/iPhone. The
default sleep mode is radio.

6. To turn off the sleep timer, press

of OFF or SNOOZE. It can also be
turned off by pressing SLEEP twice,
then select Off in the pop-up menu.

user manual

guide de l’utilisateur

EN/F

It is important to read this user manual prior to using your new product for the fi rst time.
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit
pour la première fois.

RC85i

iPhone is a trademark of Apple Inc.

iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.

Apple is not responsible for the
operation of this device or its
compliance with safety and regulatory
standards.

“Made for iPod” means that an
electronic accessory has been designed
to connect specifi cally to iPod and has
been certifi ed by the developer to meet
Apple performance standards.

“Works with iPhone” means that an
electronic accessory has been designed
to connect specifi cally to iPhone and
has been certifi ed by the developer to
meet Apple performance standards.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

Before you begin

General controls

Clock

System settings

Wallpaper

FCC Information

Radio

Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
•  Read these instructions.
•  Keep these instructions.
•  Heed all warnings.
•  Follow all instructions.
•  Do not use this apparatus near

water.

• Clean only with dry cloth.
• Do not block any ventilation

openings. Install in accordance with
the manufacturer’s instructions.

• Do not install near any heat sources

such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.

• Do not defeat the safety purpose

of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong is provided for your safety. If

Dear RCA customers,
Thank you for puchasing the RCA Photo
Clock Radio. This product includes a 7”
(16:9 Aspect Ratio) TFT Liquid Crystal
Display (LCD) monitor with radio, clock,
music player and photo functions.
Also it supports the use of SD/MMC/
MS memory cards or USB fl ash drives
for your music and photo content. This
product will play mp3 and Windows
Media™ audio (WMA) content.

To start using your iPod/iPhone
photo clock radio, please follow the
instructions in the following pages.

Unpacking the unit

You should fi nd the following items in
the box:
•   7” photo clock radio
•   AC/DC power adapter
•   AM antenna loop
•   User manual

Connect the main unit
power

• Connect the supplied AC/DC power

adapter to the product’s DC jack,
and connect to a convenient wall
outlet.

Display brightness

Press SNOOZE/BRIGHTNESS to select
the brightness level among High,
Middle and Low.

1. Press SYSTEM to show system

menu.

2. Press or

to highlight the

option and then press OK.

3. In Language sub-menu, press

to change the values and then

press OK to confi rm.

• In

Reset all setting sub-menu,

press OK. Then press

select Yes and press OK to confi rm.

4. Press

or SYSTEM to exit the

system menu.

Listening to the radio

1. Press RADIO to switch on the radio

or select AM or FM.

2. Press and hold

automatically tune to the next
available station. You can also press

to change the frequency

by one step.

• Extend and adjust the pigtail

antenna at the back of the radio for
optimum reception.

3. If you wish to turn off the radio,

press OFF.

Station presets

To store a station as preset:
1. Tune to a radio station.

2. Press OPTION and press

select Add to Preset. Then press OK.

3. All preset locations (e.g. P01) show

on the display. Press

select an available one and press
OK. You can save up to 20 preset
stations.

To recall a preset station:
1. In radio mode, press OPTION and

then press

to select Load

Preset. Then press OK.

2. All preset locations show on the

display.

Sleep function

Music

Photo

Sleep timer

The unit has a built-in sleep timer which
enables the unit to automatically turn
off after a set period of time.

Press SLEEP repeatedly until the sleep
time (Off, 15, 30, 60, 90 Mins) you desire
displays.

1. Press SLEEP to activate the sleep

timer function and the sleep icon
will be turned on.

2. When the sleep timer function is

activated, press SLEEP to show the
remainig sleep time.

3. Press SLEEP again will show a pop-

up menu. To change sleep time (90,
60, 30, 15 mins and off), press

to highlight different sleep time

and press OK.

You can also change the sleep setting
from the clock setting menu.
1. Press OPTION to enter clock setting

menu. This menu can be recalled
under in clock display mode screen.

2. Press or

to highlight Sleep

Time and then press OK.

3. Press or

to select the sleep

time and then press OK to confi rm.
The default sleep time is 90 mins.

4. Press or

to highlight Sleep

Mode and then press OK.

Audiovox Electronics Corp.

150 Marcus Blvd., Hauppauge, NY 11788

Trademark(s) ® Registered

Marque(s) ® Deposée(s)

Printed in China

Imprimé en Chine

Limited warranty

12 Month Limited Warranty
Applies to Acoustic Research Audio/
Video Products

AUDIOVOX ELECTRONICS CORP. (the
Company) warrants to the original retail
purchaser of this product that should
this product or any part thereof, under
normal use and conditions, be proven
defective in material or workmanship
within 12 months from the date of
original purchase, such defect(s) will be
repaired or replaced with reconditioned
product (at the Company’s option)
without charge for parts and repair
labor.

To obtain repair or replacement
within the terms of this Warranty, the
product is to be delivered with proof
of warranty coverage (e.g. dated bill
of sale), specifi cation of defect(s),
transportation prepaid, to the Company
at the address shown below.

This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions of
broadcast or internet service, to costs
incurred for installation, removal or
reinstallation of product, to corruptions
caused by computer viruses, spyware or
other malware, to loss of media, fi les,
data or content, or to damage to tapes,
discs, removable memory devices or

cards, speakers, accessories, computers,
computer peripherals, other media
players, home networks or vehicle
electrical systems.

This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by removal
or defacement of the factory serial
number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.

This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH
OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR

ANY OTHER WARRANTY. No person or
representative is authorized to assume
for the Company any liability other than
expressed herein in connection with the
sale of this product.

Some states do not allow limitations on
how long an implied warranty lasts or
the exclusion or limitation of incidental
or consequential damage so the above
limitations or exclusions may not apply
to you. This Warranty gives you specifi c
legal rights and you may also have
other rights which vary from state to
state.

How to make a warranty claim:
• If your product is capable of storing

content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product

will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.

• Properly pack your unit. Include

any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.

• Include evidence of purchase date

such as the bill of sale. Also print
your name and address and a
description of the defect. Send via
standard UPS or its equivalent to:

Audiovox Electronics Corp.

Attn: Service Department.

150 Marcus Blvd.

Hauppauge N.Y. 11788

1-877-833-3491

• Insure your shipment for loss or

damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.

• Pay any charges billed to you by

the Exchange Center for service not

Setting date and time

1. “Press OPTION to set the clock

time” will be displayed when
you fi rst power on the unit. Press
OPTION to enter clock setting
menu. (This prompt will be
disappeared and the the clock time
will be fl ashing to remind user if no
button is pressed for a while.)

2. Press or

to highlight the time

display format and date format,
date and time and then press OK.

3. Press

to highlight the

option.

4. Press or

to change the values

and then press OK to confi rm.

5. Press OPTION to save and exit the

clock settings menu or the menu
will exit automatically if no button
is pressed for a while.

6. Press

to toggle among three

different clock display formats.

Setting Alarm

1. Press ALARM SET.

2. Press

to select Alarm 1

or Alarm 2 setting and then press
OK to confi rm.

3. Press or

to highlight the

Playing music

1. Insert an SD, MMC or MS card into

the SD/MMC/MS card slot or insert
a USB fl ash drive into the USB
connector.

2. Press and then press

to select the source of music and
press OK.

3. Press

to highlight the fi le

you want to play.

4. Press OK to start playback.

5. To pause the playback, press OK.

Press OK again to resume playback.

6. Press

to select the

previous/next fi le or press and hold
to search backward or forward the
current song.

Settings

1. When a music fi le is highlighted,

press OPTION.

2. A pop-up menu shows Play mode

and Delete.

3. Press or

to highlight Play

mode and press OK.

4. Press or

to select among

Normal, Repeat one, Repeat all and
Shuffl e.

5. Press OK to save and exit settings.

The setting menu will also exit
automatically if no button is pressed
for a while.

Delete a fi le

1. When a music fi le is highlighted,

press OPTION.

2. A pop-up menu shows Play mode

and Delete.

3. Press or

to highlight Delete

and press OK.

4. Press

to select Yes and

press OK to confi rm.

Viewing photo

1. Insert an SD, MMC or MS card into

the SD/MMC/MS card slot or insert
a USB fl ash drive into the USB
connector.

2. Press

and then press

to select the source of photo and
press OK.

3. Press

to highlight

the desired fi le.

4. Press OK to start photo slideshow.

5. To pause the slideshow playback,

press OK. Press OK again to resume
playback.

6. Press

to select the

previous/next fi le.

Settings

1. During slideshow playback, press

OPTION.

2.  A pop-up menu shows:
•  Rotate – to rotate the photo
•  Slideshow interval – to set the

playback duration of each photo

• Display mode – to select display

mode

• Wallpaper – to select wallpaper
• Slideshow Transition – to select

different ways of transition

Warranty information

covered by the warranty.

• A new or refurbished unit will be

shipped to you freight prepaid.

What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.

For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5

Top view

Side view

VOL – / VOL + – Adjust volume

SNOOZE/BRIGHTNESS – When alarm
is on, turn off the wake function
momentarily; turn off the sleep function.
In other modes, adjust display brightness

SYSTEM – Enter to System setting mode

ALARM SET – Enter Alarm setting mode

OPTION – Display the option menu

OFF – Switch the unit to standby
mode; turn off alarm and sleep

– Menu: press to navigate

in menus in the indicated
directions.

– Radio:

press

to tune

to a station; press and hold to
start auto tune to a station; press

to select preset stations.

– Music:

press

to select

previous or next song; press
and hold to search backward or
forward the current song

OK – Play/pause music/photo
playback; confi rm selection.

– iPod/iPhone:

perform

same function as sliding the
iPod/iPhone wheel.

SLEEP – Activate/deactivate sleep
mode

ALARM 1 ON/OFF /ALARM 2 ON/
OFF – Turn on/off Alarm 1/ Alarm 2

AM loop antenna socket – Connect to
the AM loop antenna

DC jack – Connect to the power
adapter

Battery compartment – To install
2 x AAA batteries

This equipment is a Class II
or double insulated electrical
appliance. It has been designed
in such a way that it does not
require a safety connection to
electrical earth.

Back view

]

Portable Cart Warning

Illustrations contained within this
publication are for representation only
and subject to change.

The descriptions and characteristics
given in this document are given as
a general indication and not as a
guarantee. In order to provide the
highest quality product possible,
we reserve the right to make any
improvement or modifi cation without
prior notice.

Plugging in for power

AC OUTLET POWER SUPPLY:
100-240 V ~ 50/60 Hz

Important battery
precautions

• Any battery may present a risk of

fi re, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.

• Non-rechargeable batteries, such as

alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.

• If your product uses more than one

battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.

• Discard any leaky or deformed

battery immediately. They may
cause skin burns or other personal
injury.

• Please help to protect the

environment by recycling or
disposing of batteries according to
federal, state, and local regulations.

Ecology

Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.

For your records

In the event that service should be
required, you may need the model
number and the serial number. In the
space below, record the date and place
of purchase and the serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:

Technical information

Product: Digital Photo Frame for
iPhone/iPod
Brand: RCA
Model: RC85i

Electrical power
information

AC/DC Adaptor:
Input: 100 - 240 V~ AC 50/60 Hz
Output: 6V---DC 3A

This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.

However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an

outlet on a circuit different from
that to which the receiver is
connected.

• Consult the dealer or an

experienced radio/TV technician for
help.

Modifi cations not expressly approved
by the party responsible for compliance
could void the user’s authority to
operate the equipment.

This Class B digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la class
B est conforme à la norme NMB-003
du Canada.

• Once connected with power, “Press

OPTION to set the clock time”
appears after the RCA logo screen.
Refer to the following pages for
more information on setting up
date, time, alarm, listening to radio
and viewing photos.

Battery back-up operation

This clock radio is equipped with a
memory holding system that can be
powered with 2 “AAA” batteries (not
included). The power failure protection
circuit will not operate unless battery
is installed. When normal household
power is interrupted, or AC/DC power
adapter is unplugged, the batteries will
power the clock radio to keep track of
time and alarm settings programmed
into memory. When the battery
backup functions, the digital display
will not light, however, the function
of alarm still occurs during the power
interruption if remaining battery power

is adequate. Normal operation will
resume after AC power is restored so
you will not have to reset the time or
the alarm.

To install or replace the batteries:
1. Remove battery compartment door

(located at the rear of the unit) by
applying thumb pressure to the tab
on battery door and then lift the
door out and off the cabinet.

2. Insert or replace 2 AAA batteries.

3. Replace the compartment door.

• It is recommended that you replace

the batteries every year.

• It is recommended to plug the

unit for AC power while replacing
batteries to avoid the loss of clock
and wake time/mode settings.

Power failure indicator

When AC power is interrupted
(disconnected) for a short period of
time, both time and alarm settings
will change (unless batteries are
installed). After AC power is restored
(reconnected), the Digital Display
will blink to indicate that power was
interrupted and you should readjust the
time and alarm settings.

Front view

Display

Mode selection

Universal dock for
iPod/iPhone

USB host connector
(For accessing media fi les from
USB Flash Drive only. Do not
use to connect PC.)

SD/MMC/
MS card
slot

Setting wallpaper

Follow the below two options to set the
wallpaper:
Option 1:
1. Press

to enter Clock mode if you

are in other modes.

2. Press OPTION to enter clock setting

menu and then press

select Wallpaper.

3. Press OK.

4. Select below options by pressing

and then OK.

• Default: To use the built-in

photo as wallpaper

• External: To select a desired

photo as wallpaper from USB
device or memory card

• Off: To turn off the wallpaper

option and use a black
background instead

5. If you select External, press

to select the source of

wallpaper and then press OK.

6. Press ,

to select

desired wallpaper.

7. Press OK to confi rm.

• Background music – to add

background music to the slideshow.

• Delete – to delete a fi le (Refer to

“Delete a fi le” in “Music” section)

• Exit – to exit the pop-up menu

3. Press or

to highlight options

and press OK.

4. Press or

to select from options.

5. Press OK to save and exit settings.

iPod/iPhone

Listening to iPod/iPhone

To connect iPod/iPhone:
1. Press PUSH on the right side of the

unit to open the universal dock for
iPod/iPhone.

2. Place the appropriate adapter

provided with your iPod/iPhone and
then place your iPod/iPhone on the
universal dock for iPod/iPhone.

To select iPod mode:
• Press iPod/iPhone on the front of

the unit to select the iPod mode.

• Press

to select Music or

Photo/Video and then press OK.

• Playback of music fi le from the iPod/

iPhone starts automatically.

• Start playback of photo or video

fi les on your iPod/iPhone manually
fi rst. The iPod/iPhone cannot play
video automatically.

• If no iPod/iPhone is connected in

the iPod mode, the unit will show
“No iPod/iPhone connected!”.

To control the playback:
1. During playback, press OK to pause

the playback and press again to
resume.

2. Press

to skip to the

previous or next music fi le. Press
and hold

to search

backward or forward for a music
fi le.

3. Use the controls on iPod/iPhone for

photo and video fi les playback.

To charge the iPod/iPhone:
• You may charge the battery of your

iPod/iPhone through the universal
dock for iPod/iPhone while the unit
is turned off (standby mode) or
in the Music, Photo, Clock, Radio
or iPod/iPhone mode. Charging
control should be operated on the
iPod/iPhone. It is not necessary to
charge in iPod mode, unless you are
listening to the iPod.

different options include Alarm
Time, Alarm Volume, Alarm
Date, Snooze and Alarm sound
and then press OK.

4. Press or

to change the values

and then press OK to confi rm.

5. Press

to exit the alarm setting

menu or the menu will exit
automatically if no button is pressed
for a while.

6. Press ALARM 1 ON/OFF or ALARM

2 ON/OFF to turn on/off the alarm.

Option 2:
1. Press

and then press

to select the source of photo and
press OK.

2. Press ,

to select the

desired photo from the thumbnails.

3. Press OPTION to enter photo setting

menu and then press

select

Wallpaper.

4. Press or

to select ON and press

OK.

power input, the AC/DC adaptor
of apparatus shall be disconnected
from the mains.

• AC/DC adaptor is a disconnect

device. The AC/DC adaptor should
not be obstructed OR should be
easily accessed during intended use.

• Battery shall not be exposed to

excessive heat such as sunshine, fi re
or the like.

• The ventilation should not be

impeded by covering the ventilation
openings with items such as
newspaper, table-cloths, curtains etc.

• No naked fl ame sources such as

lighted candled should be placed on
the apparatus.

• Attention should be drawn to the

environmental aspects of battery
disposal.

• The use of apparatus in moderate

climates.

• The total number of fi les

or folders supported is
6000 (maximum).

• The unit can only support USB

fl ash drive and memory card
which formatted in fi le system
of FAT or FAT32.

• The supported music fi le formats

include mp3, WMA & WAV.

When the battery backup
functions, the alarm duration
is fi ve minutes only. When
AC power is connected, the alarm
duration is one hour.

Card sizes supported:
MMC card: up to 4GB;
SD card: up to 32GB;
Memory Stick: up to 16GB

JPEG is the only supported
photo fi le format.

The display will automatically
dimmed so that it will not
disturb you while you are
sleeping.

If the “Slideshow” item in the
clock setting menu is set to
“ON” and “Wallpaper” item is
set to “Default” or “Off”, the built-
in photos will be used for slideshow
in clock display mode. Otherwise,
the photos in the memory card or
USB fl ash drive will be used for
slideshow in clock display mode.

All user defi ned settings (e.g.
radio presets, clock time
format and date format) will
be lost after reset.

Works with:
• iPhone 3GS 16GB, 32GB
• iPhone 3G 8GB, 16GB

Made for:
• iPod touch 2nd generation 8GB,

16GB, 32GB, 64GB

• iPod touch 1st generation 8GB,

16GB, 32GB

• iPod nano 5th generation 8GB

or 16GB

• iPod nano 4th generation

(video) 8GB, 16GB

• iPod nano 3rd generation

(video) 4GB, 8GB

• iPod classic 80GB, 120GB, 160GB
• iPod nano 2nd generation

(aluminum) 2GB, 4GB, 8GB

• iPod nano 1GB, 2GB or 4GB
• iPod 5th generation (video)

30GB, 60GB, 80GB

•  iPod mini 4GB, 6GB
•  iPod 4th generation 20GB, 40GB
•  iPod 4th generation (color

display) 20GB, 30GB, 40GB, 60GB

Windows Media is trademarks of
Microsoft Corporation in the United
States and other countries.

• The default FM step

frequency is 200kHz and
AM step frequency is
10kHz.

• All radio preset stations will be

reset when the step frequency is
confi rmed to change.

v1.0 (1.0.1.0) (EN/F)