Timex t736 User Manual
9
Wake To Radio
1. Turn the radio ‘On’ and select the band, station, and volume level that you wish to hear when the alarm comes ‘On’,
1. Turn the radio ‘On’ and select the band, station, and volume level that you wish to hear when the alarm comes ‘On’,
then turn the radio ‘Off’ again.
2. Reconfirm the wake-up time and alarm mode settings for the alarm you are using, Alarm 1 or Alarm 2, or both alarms.
3. Slide the
3. Slide the
ALARM SELECTOR control on the front panel for one or both alarms to the Radio position. The appropriate
AL 1 and/or AL 2 indicators will light up to confirm that the alarms are set.
4. At the selected wake-up time the radio will turn ‘On’. It will play for one hour and then shut off automatically.
5. To stop the radio sooner, press either the appropriate
5. To stop the radio sooner, press either the appropriate
ALARM 1 or ALARM 2 button, or press the RADIO ON/OFF
button. The radio will stop but the alarm remains set and will turn on again at the same time on the following day,
depending on the Alarm Mode setting.
6. If you do not want the alarm to repeat on the following day, slide the appropriate
ALARM SELECTOR switch to the
‘Off’ position. The AL 1 and/or AL 2 indicators turn off.
Wake To Soothing Sounds
1. Turn the radio ‘On’, set the
1. Turn the radio ‘On’, set the
AM/FM/SOUNDS selector to the SOUNDS position, select the desired sound, and adjust
the
VOLUME control as desired. Then turn the radio ‘Off’ again.
2. Reconfirm the wake-up time and alarm mode settings for the alarm you are using, Alarm 1 or Alarm 2, or both alarms.
3. Slide the
3. Slide the
ALARM SELECTOR control on the front panel for one or both alarms to the Radio position. The appropriate
AL 1 and/or AL 2 indicators will light up to confirm that the alarms are set.
4. At the selected wake-up time the selected sound will turn ‘On’. It will play for one hour and then shut off automatically.
5. To stop the sound sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the
5. To stop the sound sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the
RADIO ON/OFF
button. The sound will stop but the alarm remains set and will turn on again at the same time on the following day,
depending on the Alarm Mode setting.
6. If you do not want the alarm to repeat on the following day, slide the appropriate
ALARM SELECTOR switch to the
‘Off’ position. The AL 1 and/or AL 2 indicators turn off.
Wake To Buzzer (Crescendo Alarm)
Note: Alarm 1 and Alarm 2 have different buzzer sounds.
• Alarm 1 is a “Single Beep” sound.
• Alarm 2 is a “Double Beep” sound.
You will be able to tell which alarm is going off by the sound that it makes.
1. Reconfirm the wake-up time and alarm mode settings for the alarm you are using, Alarm 1 or Alarm 2, or both alarms.
2. Slide the
Note: Alarm 1 and Alarm 2 have different buzzer sounds.
• Alarm 1 is a “Single Beep” sound.
• Alarm 2 is a “Double Beep” sound.
You will be able to tell which alarm is going off by the sound that it makes.
1. Reconfirm the wake-up time and alarm mode settings for the alarm you are using, Alarm 1 or Alarm 2, or both alarms.
2. Slide the
ALARM SELECTOR control on the front panel for one or both alarms to the Buzz position. The appropriate
AL 1 and/or AL 2 indicators will light up to confirm that the alarms are set.
3. At the selected wake-up time the buzzer will turn ‘On’. It will continue for one hour and then shut off automatically.
4. To stop the alarm sooner, press the appropriate
4. To stop the alarm sooner, press the appropriate
ALARM 1 or ALARM 2 button or the RADIO ON/OFF button. The
buzzer will stop but the alarm remains set and will turn on again at the same time on the following day, depending on
the Alarm Mode setting. To turn the radio on immediately press the
RADIO ON/OFF button a second time.
5. If you do not want the alarm to turn the buzzer on the following day, set the appropriate ALARM selector to the ‘Off’
position.
P13