Midland Radio P25 User Manual

680-090-2041 
Version 5.0 

http://www.midlandradio.com 

2

The antenna should be attached to your radio 
before use. Using your radio without the 
antenna may damage the radio. 
 

1.  Align the base of the antenna with the 

socket on the top of the radio. 

2.  Screw it all the way into the socket. 

Be sure that antenna seats properly. 

 

1.  With the belt clip facing up and LCD 

facing down, position the battery 
leaving approximately ½ inch 
space between the top of the 
battery and the battery latch. 
Three mating clips help you to 
align the battery. 

2.  Slide the battery all the way up 

to the battery latch, until you feel 
and hear a click. 

1.  With the belt clip facing up and 

LCD facing down, push the 
battery latch to the right until it 
stops. 

2.  Slide the battery away from the 

latch about ½ inch. 

3.  Separate the battery from the 

radio by lifting up, away from the 
radio. 

 
 

Figure 2.1 – Installing the Antenna 

Figure 2.2 – Installing the battery 

Figure 2.3 – Removing the battery