Roberts Radio Classic DAB User Manual

13

1.  Carefully extend the telescopic aerial.

2. Press 

the 

On/Off button to switch on your radio. If your radio is 

currently in FM mode proceed to step 4. (FM icon is displayed in 
FM mode.) 

3.  If you were listening in DAB mode press the Station/Menu 
 

button and then rotate the Tuning/Select control until 'TO FM' 

 

shows on the display. Press the control to switch to FM mode.

4. Press 

the 

Auto Tune button. Your radio will scan in an upwards 

direction (low frequency to high frequency) and stop automatically 
when it fi nds a station of suffi cient strength. 

5.  After a few seconds the display will update. The display will show 

the frequency of the signal found. If the signal is strong enough and 
there is RDS data present then the radio will display the station 
name.

6.  Press and hold the Auto Tune button to scan the FM band in a 

downwards direction (high frequency to low frequency).

7.  When the waveband end is reached your radio will recommence 

tuning from the opposite waveband end.

8. Rotate 

the 

Volume control to the required setting.

9.  To switch off your radio press the On/Off button.

3

3,8

4,6