Roberts Radio ecologic 2 User Manual

Page of 28
Using the AC adaptor
 
The AC adaptor for use with the ecologic 2 should provide 12 volts 
DC output at 1 amp, centre pin positive.
1.  Insert the adaptor plug into the DC in socket on the left hand side of 
your radio. 
2.  Plug the adaptor into a standard 13A mains socket outlet. Whenever 
the adaptor is plugged in to the radio and switched on at the mains the 
batteries are automatically disconnected. If the adaptor is plugged in to 
the radio but not switched on then the radio will run from the batteries 
if fi tted.
 
The AC adaptor should be disconnected from the mains supply and 
the radio when not in use.
• IMPORTANT: 
The mains adaptor is used as the means of connecting 
 
the radio to the mains supply. The mains socket used 
 
for the radio must remain accessible during normal use. In order 
 
to disconnect the radio from the mains completely, the mains 
 
adaptor should be removed from the mains socket outlet 
 completely.
5
4.  The charge indicator lights to show that the batteries are charging. 
Batteries will be fully charged in around 7 hours.
• 
Important: when using rechargeable batteries the battery switch 
must be placed in the rechargeable position. Batteries will only 
be charged when the radio is switched off and connected to the 
AC adaptor.
• 
Reduced power, distortion or your radio switching off by itself are all 
signs that the batteries may need recharging.
• 
If the radio is not to be used for any extended period of time it is 
recommended that the batteries are removed from the radio.
 
IMPORTANT: The batteries should not be exposed to excessive heat 
 
such as sunshine, fi re or the like. After use, disposable batteries should 
 
if possible be taken to a suitable recycling centre. On no account 
 
should batteries be disposed of by incineration.