Jensen VM9114 User Manual

VM9114

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to
play a DVD while the vehicle is moving, the TFT screen display a parking
brake notice. Rear video screens, if applicable, will operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (1). The unit beeps and
then opens.

Closing the TFT Screen

Press the OPEN button (1) again to close the TFT screen. If the screen is in
the “IN” position, it moves out before closing.

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized (see “Rating Sub-menu Features” on page 13).

You cannot insert a disc if there is already a disc in the unit or if the power is
off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.

Ejecting a Disc

Press the button (6) on the front panel to eject the disc. The unit
automatically reverts to Tuner mode. You may eject a disc with the unit
powered off. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button (6) on the front panel to reset the loading
mechanism. Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button
(10) on the front panel.