Clarke SCRUBTEC 743L User Manual

Squeegee Lift Handle,  See Figures 4 and 5
The squeegee lift handle is located in the control
handle.  It is used to raise or lower the squeegee.  The
vacuum motor is turned on when the handle is lowered
to either the center or lowest position.

Float Shut Off, See Figure 6
The shut-off switch for the vacuum motor is located in
the recovery tank.  It automatically turns off the
vacuum motor when the recovery tank is full.  NOTE: If
excessive foaming occurs in recovery tank,
defoamer must be added.  Damage to vacuum
motor could result from foam entering into the
vacuum motor.

Parking Brake (Optional)
NOTE: Parking Brake must be used if operating
machine on surfaces with greater than 2% gradi-
ent.
The parking brake prevents movement of the machine.

The brake is located to the right hand rear of the
machine.  Press pedal to activate brake and lift pedal
to disengage brake.