Blomberg TKF 8451 AG 50 User Manual

3 EN

This section contains safety instructions 
that will help protect from risk of personal 
injury or property damage. Failure to 
follow these instructions shall void any 
warranty.

•  Never place the product on a carpet-

covered floor; otherwise, lack of 
airflow beneath the machine will 
cause electrical parts to overheat. 
This will cause problems with your 
product.

•  Do not operate the product if the 

power cable / plug is damaged. Call 
the Authorized Service Agent.

•  Do not make any changes on the 

plug supplied with the product. If it is 
not compatible with the socket, have 
a qualified electrician change the 
socket with a suitable one.

•  Never touch the plug with wet hands! 

Never unplug by pulling on the cable, 
always pull out by grabbing the plug.

•  Connect the product to a grounded 

outlet protected by a fuse of suitable 
capacity as stated in the technical 
specifications table.

•  Power cable of this product is 

equipped with a conductor and 
a grounding plug that allows for 
grounding the product.  This plug 
must be inserted into a socket 
which is installed and grounded in 
accordance with the local laws and 
regulations. Grounding installation 
decreases the risk of electric shock 
by opening a path with low resistance 
for the electricity flow in case of a 
malfunction or failure. Do not neglect 
to have the grounding installation 
made by a qualified electrician. 
If you have any suspect about 
the grounding installation, have it 

checked by a qualified electrician or 
the Authorized Service Agent. Our 
company shall not be liable for any 
damages that will arise when the 
product is used without grounding in 
accordance with the local regulations.

•  The product should not be plugged 

in during installation, maintenance, 
cleaning and repair works.

•  Always have the installation and 

repairing procedures carried out 
by the Authorized Service Agent. 
Manufacturer shall not be held 
liable for damages that may arise 
from procedures carried out by 
unauthorized persons.

•  Do not use electrical devices in the 

product.

•  Do not connect the air exit of the 

product to the chimney holes which 
are used for the exhaust fumes of the 
devices operating with gas or other 
types of fuel.

•  You must provide enough ventilation 

in order to prevent gases exiting from 
devices operating with other types of 
fuels including the naked flame from 
accumulating in the room due to the 
back fire effect.

•  Items cleaned or washed with 

gasoil/fuel oil, dry-laundry solvents 
and other combustible or explosive 
materials as well as the items that are 
contaminated or spotted with such 
materials should not be dried in the 
product since they emit flammable or 
explosive vapor.

•  Do not dry the laundry cleaned with 

industrial chemicals in the dryer.

•  Underwear that contains metal 

reinforcements should not be dried in 
the dryer. Dryer can get damaged if 
metal reinforcements come loose and