Blomberg TKF 8439 A User Manual

20 EN

intervals to remind that the condenser 

needs cleaning.

Dryer door open symbol lights up.

With the “Time delay” function you can 

delay the programme start up to 24 hours. 

1. Open the loading door and put the 

laundry in.

2. Set the drying programme and spin 

speed, and if required, select the 

auxiliary functions.

3. Press “Time delaying” buttons “+” and 

“-” to set the desired time delay. The 

time delay symbol will flash.

4. Press “Start/Pause/Cancel” button. 

Then the time delay starts to count 

down. The Time delay symbol lights up. 

Start symbol lights up.

The “:” in the middle of the displayed time 

delay will start flashing.

More laundry may be loaded or taken out 

during the time delay period. At the end of 

the time delay countdown process, time 

delay symbol fades, drying process starts 

and the programme duration is displayed. 

The time on the display is the total of 

normal drying time and delay time.

Time delay is started by pressing the start/

pause/cancel button in the example figure.

If you want to change the time during the 

countdown:

1. Press “Start/Pause/Cancel” button for 

3 seconds to cancel the programme. 

Time delay function must be set again 

for the required time.

2. Press Time delay buttons “+” or “-” to 

set the desired time delay.

3. Press “Start/Pause/Cancel” button. The 

Time delay symbol lights up. Pause 

symbol fades. Start symbol lights up.

4. The “:” in the middle of the displayed 

time delay will start flashing.

If you want to cancel the time delay 

countdown and start the programme 

immediately:

1. Press “Start/Pause/Cancel” button for 3 

seconds to cancel the programme. 

2. Then, press “Start/Pause/Cancel” 

button to start the desired programme.

1.  Press “Start/Pause/Cancel” button to 

start the programme.

2.  “Start/Pause” symbol will light up 

to indicate that the programme has 

started and “:” symbol between the 

remaining time will continue flashing.

Drying

Iron

Wardrobe

(Extra)

Ventilation

Anti-

creasing

The progress of a running programme is 

shown through a number of symbols on 

the screen.

At the beginning of each programme 

step, the relevant symbol in the series 

of symbols will light up and thus, all 

symbols will remain lit up at the end of 

the programme. The symbol that is lit up 

at the far right of the series of symbols 

indicates the step that is being carried out.

- Lights up in all programmes apart from 

drying and ventilation.

- Starts to illuminate when the drying 

degree reaches “iron dry” step and remains 

illuminated until the next step.

Starts to illuminate when the drying degree 

reaches “wardrobe dry” step, and remains 

illuminated until the next step.

Starts to illuminate when the drying degree 

reach to “wardrobe dry extra” step.

- Illuminates when the programme ends.

C  Anti-creasing icon will light up at the