Blomberg DV 17540 NBL00 User Manual
12 - EN
elbows to not hinder air flow.
C
To prevent water accumulation in the duct,
make sure it is not folded on the floor.
C
In Canada only those foil-type flexible ducts,
if any, specificially identified for use with the
appliance by the manufacturer shallbe used. In
the United States, only those foil-type flexible
ducts, if any, specifically identified for use
with the appliance by the manufacturer and
that comply with the Outline for Clothes Dryer
Transition Duct, Subject 2158A, shall be used.
A
The appliance should not be vented into
a chimney, a wall, a ceiling, an attic, a crawl
space or a concealed space of a building.
A
Do not operate the appliance at the same
time with heaters such as a coal or gas stove.
Airflow may cause the chimney to flare up.
C
Care must be taken not to pinch or bend
the ducts.
C
The end of the hose should not be bent, it
should not be stepped on and it must not be
folded between the drain and the machine.
C
The total lenght of flexible metal duct shall
not exceed 7.8 foot (2.4 m).
C
The duct shall not be assembled with
screws or other fastening means that
extend inside the duct to catch lint.
Destroying packaging material
Packaging material can be dangerous to
children. Keep the packaging materials out
of the reach of children or dispose of them
accordingly. Do not dispose of them together
with normal domestic waste.
Packaging materials of your appliance are
manufactured from recyclable materials.