Beko DC 7100 User Manual

8 EN

A

 Prior to installation, visually check if the 

product has any defects on it. If so, do not have 

it installed. Damaged products will cause risks 

for your safety.

•  Install the product in an environment which 

has no risk of freezing and is in a stable and 

level position.

•  Operate your product in a well ventilated, 

dust-free environment.

•  Do not block the air ducts in front of and 

under the product with materials such as 

long pile rugs and wooden plinths.

•  Do not place your product on a long pile rug 

or on similar surfaces.

•  Do not install the product behind a door with 

a lock, sliding door or a hinged door which 

can strike the product.

•  Once the product is installed, it should stay 

at the same place where its connections 

have been made. When installing the 

product, make sure that the rear wall of it 

does not touch anywhere (tap, socket, etc.) 

and also pay attention to install the product 

at a place where it will stay permanently.

B

 Do not place the product on top of the 

power cable.

•  Keep at least 1.5 cm distance to walls of 

other furniture.

A

Remove the transportation safety assembly 

before using the product for the first time.

1.  Open the loading door.

2.  There is a nylon bag inside the drum that 

contains a piece of styrofoam. Hold it from 

its section marked with XX.

3.  Pull the nylon towards yourself and remove 

the transportation safety assembly.

A

Make sure that you have removed 

the transportation safety assembly 

(nylon+styrofoam pieces) before using the 

product for the first time. Do not leave any 

items inside the drum.

•  The product should never be operated 

without the top trim.

•  Leave at least 3 cm of space between 

the side and rear walls of the product and 

the walls of the counter/cupboard when 

installing your product under a counter or in 

a cupboard.

•  A fitting device should be used between 

the two machines when installing above 

a washing machine. The bracket must be 

installed by the Authorised Service Agent.

•  Place the product on a firm floor. If it will be 

placed on top of a washing machine, the 

approximate weight of both machines may 

reach 180 kg when they are full. Therefore, 

the floor must be capable of carrying the 

load on it!

.

In order to ensure that your machine operates 

more silently and vibration-free, it must stand 

level and balanced on its feet.  Balance the 

machine by adjusting the feet.

Rotate the feet to adjust until the machine 

stands level and firmly.

C

 Never unscrew the adjustable feet from their 

housings.

•  To have the product ready for operation 

before calling the authorised service agent, 

make sure that its location and power supply 

installations are appropriate. If they are 

not, call a qualified electrician to have any 

necessary arrangements carried out.

•  Make sure that the power connections of 

the product are in accordance with the 

instructions given in relevant chapters of this 

manual.