Sterling 60 cfm User Manual

15, 30, & 60 cfm Compact Dryers 

 

24 

 

preprogrammed by the operator. 

 Proportional 

Band 

Mode (P) 

This setting controls the amount in which the 
manipulated variable (MV) is proportionate to the 
deviated value or controller error. 

 Integral 

Time 

Mode (I) 

Setting this feature, gives the control an action that 
is proportionate to the time integral of the control 
error.  By using this setting, proportional action is 
used in combination with integral action to offset 
the control error and the set point will begin to 
match the control temperature (PV or process 
value). 

 Derivative 

Time 

Mode (d) 

Setting the derivative control provides the 
controller with the ability to correct for a future 
error in the previously set process output. 

 

To enter the display:   

1.  Press the 

 Mode Display key to view the Run/Stop & Alarm 1 Modes. 

2.  Press 

 and 

 to set the higher or lower the values of the parameter or turn 

that function On or Off. 

The 

SV readout

 displays the different values for the parameter within a mode. 

3.  To switch modes within a level, press and hold the 

 Level Display key for one 

(1) second. 

The 

 readout will display the different parameters within each mode. 

4.  Use short presses on the 

 Mode Display key to display each parameter within 

a mode. 

The 

 readout displays the different values for the parameter within a mode. 

5.  Press 

 and 

 to set the higher or lower the values of a parameter or turn 

that function On or Off. 

6.  Press 

 Level Key once to return to the Process Temperature Setting.