Haier HWS60-50 User Manual

Page of 8
1
2
3
4
Hang up the drain hose.
Pull off  the power plug and hang up the power cord.
Wipe the complete unit with soft cloth twisted dry.
Open  the inner/outer  cover  of  the  spin  tub   for some time (about one hour), 
      then close them.
Disposal after spinning
1
2
Wipe off the water drops on 
     the surface and  inside  the
     tub with clean soft cloth.
Be sure to pull off the power
     plug before maintenance.
Maintenance
If the cabinet is dirty, wipe it with wet soft cloth
Do not wash it directly by water.
Wipe with neutral detergent if too dirty
Do not wipe with thinner, petrol, 
 alcohol, etc.
Thinner
Alcohol
Petrol
Trouble-shooting  Answer to question
The machine does not act.
Is there power failure--Please use it when there's power supply.
Is the power plug loose--
(If  there's  breakdown,  please pull  off the power  plug  before checking) The following
 phenomena  are not  breakdowns  sometimes.  Please  confirm  again  before sending
 it to repair.   If there are real  breakdowns,  please  come to  the  special  maintenance 
department or after-sale service department of our company. Do not repair it by yourself.
Phenomena              The reason-How to solve
There's abnormal sound 
and violent vibration 
during spinning
Is the machine slanting--Adjust the machine to be even
Is the gland pressed evenly--
Insert the power plug tightly.
Put the gland in properly
Check if the laundry is inclined to one side--Take it 
out and replace it evenly.
Check if there are any metal articles in the laundry.
-- take them out.
Check if it is too full with the laundry-- load the laundry
 only in the right amount.
Check if there are any articles out of the spinning drum
-- put them into the drum.