Haier HDY-D70-E User Manual

The following must be confirmed before calling for service:

Problem

The dryer does not

start

Possible Cause

● Is the power supply plugged in and switched on.

● Plug another appliance into the wall socket to

test if there is power.

● Check if a drying program has been set;

● the Start/Pause button has been pressed;

● The water collection box is full;

The drying result is not

good and the drying

time is too long.

●Is the drying program setting correct;

●Has the filter screen been cleaned ;

●Is the condenser blocked;

● Does the amount of the loaded laundry

exceed the rated load;

● Has the loaded laundry been spun dry;

●Is the vent duct blocked;

● Has the surface of the inside of the drum

got a deposit layer forming, if so clean the

drum interior;

The remaining time

display is halted, or the

remaining time displayed

is skipping

The remaining time will be adjusted and corrected

continuously and automatically based on the

following factors:

●Type of laundry;

●Loaded amount;

●The degree of spinning dry of laundry;

●Ambient temperature;

The automatic adjustment is a normal operation.

Prompt and Alarm Information

In case of an improper operation or trouble with the machine when it

operates, the code corresponding to the trouble will be displayed on the

screen:

Code