Haier GDZ5-1C User Manual

1. Sort clothes for drying. Separate dark and light colored items, like you do for

washing. Check for stains that have not been removed in washing. Dryer
heat may permanently set some stains. Properly dried clothes will need 
minimum of care when removed from dryer.

2. Load up dryer with washed clothes. For optimum results, use dryer load of

similar weight, fabric and construction. Place small items in a mesh bag to
prevent from tangling. Do not overload the dryer. An average load will fill up
half the drum. Add fabric softener sheet if desired.

3. Select the drying temperature depending on the fabric type.

4. Select the drying time depending on the fabric type and load size.

5. Push the start button to start the drying cycle.

6. Wait for the drying cycle to finish before opening the dryer door.

7. Clean the lint filter after every load and before each use. A clean filter

ensures sufficient drying. A layer of lint on the filter reduces airflow through
the clothes and reduces drying time.

Note: Do not over dry clothes. Over drying can cause shrinkage, 

harshness and wrinkling of fabric.

Following sounds are normally heard during the operation of the dryer.

• Tumbling sounds. This is normal as the heavy wet clothes in the dryer are

continuously being tossed around.

•  Air rushing noise. This happens as the dryer drum spins at very high RPM

and the air is rushing through the dryer drum.

•  Timer clicks may be heard.