Haier CGDE700AW User Manual

The following sounds are normal during the operation of the dryer.

• Tumbling sound: this is normal as the heavy wet clothes in the dryer are 

continuously being tossed around.

• Air rushing noise: this happens as the dryer drum spins at very high RPM and 

the air is rushing through the dryer drum.

• For best drying results, clean the lint filter before and after every use.

• Do not overload the dryer.

• Balance the dryer load, evenly throughout the dryer for the best result. 

• Drying time depends on many variables: load size,type of fabric, and 

moisture in it, heat and moisture in the room, electric voltage, length of the 
exhaust duct, etc.

• To eliminate guessing and conserve energy,we recommend for certain clothes 

to choose an auto drying setting.

• Always follow the fabric care instructions supplied by the garment 

manufacturer.

• Lint filter needs to be cleaned 

before and after each use for your 
unit to operate at optimum 
efficiency. The filter can be removed 
by pulling on the tabs located on 
the inside of the dryer door. The 
filter may be washed or vacuumed.
Remove the excess water from the filter 
by gently shaking the filter. This will remove dust and particles trapped in 
the filter. Lint built up in screen restricted airflows. This causes longer drying 
time. After cleaning slide the filter back in place. Do not use your dryer with
out the lint filter.

• Do not use any type of spray cleaner when cleaning the interior.

• Hazardous fumes or electric shock could occur. If dryer drum becomes stained,

clean the drum with damp cloth. Remove any residue before drying next load.

• Clean the cabinet with mild soap and water. Do not use harsh or abrasive 

cleaners, this could damage the dryer.

• Clean the duct and the vent on a regular basis to avoid clogging which 

could affect the efficiency of the dryer.

Lint Filter