Miele 04 950 470 User Manual

Check and indicator lights:

What to do if . . .

Cause . . .

Remedy . . .

. . . once the programme has
started the following symbols
appear in the display:
"

===

...

-==

...

...“

This is not a fault.

See the “Display” section.

. . . the programme is inter-
rupted, the “Anti-crease/Fin-
ish” indicator light comes on
and

appears in the display.

If there is no laundry in the drum when the programme is started, the
electronics will register this and stop the programme.
The programme will also be interrupted if the laundry placed in the
drum is already dry.

. . . the programme is inter-
rupted and "

---

" appears in

the display.

See the section on “What to do if the drying process goes on too
long”.

. . . shortly before the end of
the programme the count
down of the time left to run
halts at "

", but the dryer con-

tinues to dry.

This is not a fault.
One of the pieces being dried is
considerably larger than items
that have been dried in previous
programmes. The time left may
vary from that calculated by the
machine for a normal load.

The drying process is not yet
complete. The programme
needs more time than the
electronic unit had calculated at
the start of the programme.
The time count down is
suspended until the degree of
drying selected has been
reached.

Problem solving guide