Amana W10216187A User Manual

Page of 24
14
4. Check that the dryer is level. See “Level Dryer.”
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.
WARNING
5. Plug into a grounded 3 prong outlet. Turn on power.
6. Remove any protective film or tape remaining on the dryer.
7. Dispose of/recycle all packaging materials. 
8. Read “Dryer Use.”
9. Wipe the dryer drum interior thoroughly with a damp cloth to 
remove any dust.
10. Select a Timed Dry heated cycle, and start the dryer. Do not 
select the Air Dry Temperature setting.
If the dryer will not start, check the following:
Controls are set in a running or “On” position.
Start button has been pushed firmly.
Dryer is plugged into a grounded 3 prong outlet.
Electrical supply is connected.
Household fuse is intact and tight, or circuit breaker has 
not tripped.
Dryer door is closed.
11. When the dryer has been running for 5 minutes, open the 
dryer door and feel for heat. If you feel heat, cancel cycle and 
close door. If you do not feel heat, turn off the dryer and 
check that the gas supply line shutoff valve is open.
If the gas supply line shutoff valve is closed, open it, then 
repeat the 5-minute test as outlined above.
If the gas supply line shutoff valve is open, contact a 
qualified technician.
DRYER USE
Starting Your Dryer
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as 
gasoline, away from dryer.
Do not dry anything that has ever had anything 
flammable on it (even after washing).
Failure to follow these instructions can result in death, 
explosion, or fire.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on 
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried 
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death 
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to 
persons, read the IMPORTANT SAFETY INSTRUCTIONS before 
operating this appliance.
Follow these basic steps to start your dryer. Please refer to 
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See “Cleaning the Lint 
Screen.”