Amana W10296137A-SP User Manual

6.  Be certain to keep cardboard spacer centered between doors. 

Reattach outer door panel to inner door panel so handle is on 

the side where hinges were just removed.

7.  Attach door hinges to dryer door so that the larger hole  

is at the bottom of the hinge.

8.  Remove door strike (E) from cabinet. Use a small, flat-blade 

screwdriver to gently remove 4 hinge hole plugs (F) on left 

side of cabinet. Insert plugs into hinge holes on right side  

of cabinet.

9.  Insert screws into bottom holes on left side of cabinet. 

Tighten screws halfway. Position door so large end of door 

hinge slot is over screws. Slide door up so screws are in 

bottom of slots. Tighten screws. Insert and tighten top screws 

in hinges.

10. Remove door strike plug (B). Insert the door strike you 

removed in Step 8 into hole and secure with screw. Insert 

door strike plug into original door strike hole and secure  

with screw.

11. Close door and check that door strike aligns with door catch 

(C). If it is needed, slide door catch left or right within slot to 

adjust alignment.