Clarity C1000 User Manual

Page of 56
13
 
Note for Users with Pulse/Rotary service only: 
Many automated answering 
systems used by banks, stores and government agencies ask you to “Push 1 for 
service”, “Push 2 for the operator”, etc. You must switch the tone/pulse switch on 
the top edge of the phone to tone before responding to these prompts. In sum-
mary, dial the phone number you want to call in pulse mode, switch to tone mode 
to interact with the automated answering system, switch back to pulse mode 
when your call is done. When switching from Pulse to Tone during a call, there will 
be a 3 second delay from the time you first push a key in tone mode until the key 
press is transmitted. 
Important:
 You must have tone signaling service to use the TONE feature on the 
Clarity telephone. If in doubt, contact your local telephone company.
To Set the TONE/PULSE Switch:
1.  Move the switch towards the correct setting.
2.  Depress the hookswitch once.
3.  The phone will now dial in the mode you selected.
Last Number Redial
Last Number Redial allows you to automatically redial the last telephone number 
you called. This feature is convenient for redialing numbers which are busy. The 
phone number stored for redial will be reset with every new call you make.
To Operate Last Number Redial:
1.  Depress the hookswitch to get a new dial tone.
2.  Press the “Redial” Button once.
3.  Stay on the line, and your call will be dialed.
The last number dialed will be stored in the Clarity telephone for you until you 
dial another number.
Flash
Flash is a special feature that is required to use some calling services provided 
by your local phone company, such as call waiting. Consult your guide to these 
services which are available from your local phone company. Flash serves the same 
purpose as pressing and releasing the hook switch very quickly.
C1000 FEATURES