Electrolux 134709300 User Manual

MINIMUM INSTALLATION CLEARANCES - Inches (cm)

SIDES

REAR

TOP

FRONT

 Alcove

0” (0 cm) 0” (0 cm)* 0” (0 cm)

n/a

 Under-

 Counter 0” (0 cm) 0” (0 cm)* 0” (0 cm)

n/a

 Closet

0” (0 cm) 0” (0 cm)* 0” (0 cm) 1” (2.54 cm)

Installation Requirements

       IMPORTANT

DO NOT INSTALL YOUR DRYER:

1.  In an area exposed to dripping water or outside

weather conditions.

2.  In  an  area  where  it  will  come  in  contact  with 

curtains, drapes, or anything that will obstruct 

the flow of combustion and ventilation air.

3.  On carpet. Floor MUST be solid with a maximum

slope of 1 inch (2.54 cm).

1.  A dryer installed in a bedroom, bathroom, 

recess or closet, MUST be exhausted outdoors.

2.  No other fuel burning appliance shall be 

installed in the same closet as the gas dryer.

3.  Your dryer needs the space around it for proper 

ventilation.

DO NOT install your dryer in a closet with a solid 
door.
4.  Closet door ventilation required: A minimum 

of 120 square inches (774.2 cm²) of opening,
equally divided at the top and bottom of the 
door, is required. Openings should be located 
3 inches (7.6 cm) from bottom and top of door.
Openings are required to be unobstructed 
when a door is installed. A louvered door with 
equivalent air openings for the full length of the 
door is acceptable.

closet door

       NOTE

To achieve an installation with 0” (0 cm) clearance
for the back of the dryer (for other than straight
back venting), a quick-turn 90° dryer vent elbow
must be installed as described previously in this 
manual.

F

*  or other than straight back venting, a quick-turn 90° 

dryer vent elbow must be installed to achieve 0” (0 cm)

installation.