Sony HVL-F60M Manual
Pre
p
ar
at
io
at
io
n
s
27
GB
Changing the flash mode
1
Press the MODE button to display the MODE screen.
2
Move the cursor (highlighted item) by rotating the
control wheel or pressing it up, down, left or right to
select a flash mode.
control wheel or pressing it up, down, left or right to
select a flash mode.
3
Set the selected mode by pressing the center of the
control wheel or the MODE button.
control wheel or the MODE button.
• The screen changes to the normal indicator screen of the selected mode.
• You cannot select [MANUAL], [MULTI], [WL RMT] or [WL CTRL] in
the following cases. (Items that cannot be selected are shown by a dotted
line)
[MANUAL] or [MULTI]
– When the power is turned on at the camera (during communication)
– When the camera’s recording mode is other than M mode*
line)
[MANUAL] or [MULTI]
– When the power is turned on at the camera (during communication)
– When the camera’s recording mode is other than M mode*
* Can be selected if MANUAL mode is set to PASM in the MENU
settings.
[WL RMT] or [WL CTRL]
– When the power is turned on at the camera (during communication)
– When the camera's flash mode is not set to wireless (WL)
– When the power is turned on at the camera (during communication)
– When the camera's flash mode is not set to wireless (WL)