Sony HVL-F43AM Manual
HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\050C02.fm
Master: Left
26
4
Press the shutter button when charging is complete.
M (Manual exposure mode flash
photography)
photography)
Set the aperture and shutter speed.
• Reduce the aperture (i.e. increase the f-
• Reduce the aperture (i.e. increase the f-
stop) to reduce the flash range, or open
the aperture (i.e. reduce the f-stop) to
increase the flash range.
the aperture (i.e. reduce the f-stop) to
increase the flash range.
Recording mode of the camera
Settings
TTL flash
Manual flash provides a fixed flash intensity irrespective of the brightness of
the subject and the camera setting. TTL* flash measures the light from the
subject that is reflected through the lens.
TTL metering also has a P-TTL metering function, which adds a pre-flash to
TTL metering, and an ADI metering function, which adds distance data to the
P-TTL metering.
This flash unit defines all P-TTL and ADI metering as TTL flash and
the subject and the camera setting. TTL* flash measures the light from the
subject that is reflected through the lens.
TTL metering also has a P-TTL metering function, which adds a pre-flash to
TTL metering, and an ADI metering function, which adds distance data to the
P-TTL metering.
This flash unit defines all P-TTL and ADI metering as TTL flash and
is displayed on the LCD panel.
*
TTL = through the lens
• ADI metering is possible in combination with a lens with a built-in distance
encoder. Before using the ADI metering function, check whether your lens
has a built-in distance encoder by referring to the specifications in the
operating instructions supplied with your lens.
has a built-in distance encoder by referring to the specifications in the
operating instructions supplied with your lens.