Canon 2356A002 User Manual
29
* C.Fn-8 and C.Fn-9 apply to the MT-24EX only.
C.Fn-4: If 1 is set and both flash tubes/heads are selected to fire with autoflash,
the modeling flash will be fired by both A and B at the same output. With
manual flash, the modeling flash will be fired according to the flash ratio
that was set.
manual flash, the modeling flash will be fired according to the flash ratio
that was set.
C.Fn-5: If 1 is set, any slave units whose slave ID has been set to A or B will fire in
the same group as flash tube/head A or B set as the master unit.
C.Fn-6: If 1 is set and you press the camera’s depth-of-field preview button, you
can check the depth of field. The modeling flash cannot be fired.
Custom Function Settings
C.Fn
Function
No.
Setting Description
1
Automatic cancellation
of FEB
of FEB
0
Enabled
1
Disabled
2
FEB sequence
0
Standard exposure
Decreased
exposure
Increased exposure
1
Decreased exposure
Standard
exposure
Increased exposure
3
Flash metering mode
0
E-TTL II/E-TTL autoflash
1
TTL autoflash
4
Test firing button
0
E-TTL II/E-TTL autoflash: Full output
Manual flash: Fires at set output
Manual flash: Fires at set output
1
Uniform modeling flash
5
Wireless control
0
Slave C only
1
Slaves A, B, and C
6
Modeling Flash
0
Enabled
1
Disabled
7
Flash recycling with
external power source
external power source
0
Recycle with both the MR-14EX/MT-
24EX and external power source
24EX and external power source
1
Recycle with the external power
source only
source only
8
Flash ratio increments
0
1/2 stop
1
Full stop
9
Focusing lamp on/off
0
With focusing lamp button
1
Double-click shutter button
MR14_MT24_02.fm Page 29 Saturday, January 23, 2010 10:46 AM
COP
Y