Sony HDC-F950 User Manual

Chapter 4 Adjustments and Settings for Recording

 Chapter 4

Adjustments and Settings for Recording

4-17(E)

Use the ‘!’ IND 1 and ‘!’ IND 2 pages of the
OPERATION menu to select the items for which an
exclamation mark (!) lights in the viewfinder.
The settings on this page can be confirmed by pressing
the STATUS/CANCEL switch towards STATUS
when the DISPLAY switch is set to ON or OFF.

Use the following procedure to make the selection.

Set the DISPLAY switch to MENU.

Turn the MENU SEL knob/ENTER button, to
display the ‘!’ IND or ‘!’ IND 2 page, then press
the MENU SEL knob/ENTER button.

Example: ‘!’ IND 1 page

The current settings of each item appear to the
right of the item.
The above figure shows the default settings.  All
items have been set to ON at the factory.  However
the conditions whether an exclamation mark (!)
lights up depend on the settings at the NORMAL
column.  You can change these conditions.

ND

When any ND filter other than 1 is
selected

CC

When any CC filter other than B is
selected

WHITE

When the WHITE BAL switch (white
balance memory) is set to the position
other than A and B

D5600K

When D5600K is set to ON on the
OTHERS page.  When D5600K is set to
OFF on the OTHERS page, the ! mark
does not light even if IND is set to ON on
this page

GAIN

When GAIN switch is set to any position
other than L

SHUTT

When the electronic shutter is used

FAN

When FAN mode setting with the
MAINTENANCE menu is other than
AUTO1

EXT

When the lens extender is in use.  When
the lens extender is not in used, the !
mark does not light even if IND is set to
ON

FORMAT

When the format other than 23.98PsF is
selected

CHU OUT

When any output other than 4:4:4 is
selected

CHU OPE

When any mode other than NORMAL is
selected

META DATA When meta data is set to OFF

Perform the desired settings for each item.

Whether the exclamation mark should light or not
is set in the IND column.

1

 Turn the MENU SEL knob/ENTER button to

move the arrow marker (

c) to the item you

want to set, then press the MENU SEL knob/
ENTER button.

The arrow marker (

c) changes to a question

mark (?).

2

 Turn the MENU SEL knob/ENTER button to

select ON or OFF as desired, then press the
MENU SEL knob/ENTER button.

The “?” mark changes back to the arrow marker
(

c) .

When you select ON in step 2, set the condition
for lighting in the NORMAL column by selecting
the normal condition where the ! mark dones not
light.
When you select OFF, proceed to step 

.

3

 Turn the MENU SEL knob/ENTER button to

move the arrow marker (

c) to the NORMAL

column of the item you select in step 1, then
press the MENU SEL knob/ENTER button.

The arrow marker (

c) changes to a question

mark (?).

<'!' IND 1>      2

       [IND] [NORMAL]
ND    :

c ON   1---

CC    :  ON   -B--
WHITE :  ON   -AB
D5600K:  ON   OFF
GAIN  :  ON   L--
SHUTT :  ON   OFF
FAN   :  ON   AUTO1
EXT   :  ON   OFF
FORMAT:  ON   23.98PsF