Sony HDC-F950 User Manual
Chapter 4 Adjustments and Settings for Recording
Chapter 4
Adjustments and Settings for Recording
4-3(E)
4
Adjust the lens iris opening.
With a manually adjusted lens: Set the opening
With a manually adjusted lens: Set the opening
to an appropriate value.
With a lens which has automatic iris control:
Set the lens’ automatic/manual iris control
switch to automatic.
switch to automatic.
5
Push the AUTO W/B BAL switch to WHT and
release the switch.
release the switch.
The switch will return to the center position, and
adjustment will be performed.
adjustment will be performed.
During adjustment, the message “AWB: OP” will
be displayed in the lower left corner of the
viewfinder screen.
be displayed in the lower left corner of the
viewfinder screen.
After about one second, a message like the one in
the figure below will be displayed, and the
adjustment process will complete. The adjusted
value will be automatically stored in the memory
(A or B) selected in step
the figure below will be displayed, and the
adjustment process will complete. The adjusted
value will be automatically stored in the memory
(A or B) selected in step
1
.
Note
When using a zoom lens with automatic iris control
capability, hunting
capability, hunting
1)
may occur. Adjust the lens’ iris
gain control (labeled IG, IS, S, etc.).
For more information, refer to the lens’ operation manual.
AUTO W/B BAL switch
AWB:OK
When automatic white balance adjustment
fails
fails
If the white balance adjustment process does not end
successfully, the error message “AWB: NG” will be
displayed on the viewfinder screen for approximately
three seconds.
successfully, the error message “AWB: NG” will be
displayed on the viewfinder screen for approximately
three seconds.
If this error message is displayed, try black balance
adjustment again.
If the error message continues to be displayed after
several attempts, the camera requires internal
inspection.
adjustment again.
If the error message continues to be displayed after
several attempts, the camera requires internal
inspection.
Refer to the optional Maintenance Manual for information
on internal inspection.
on internal inspection.
When there is no time to adjust the white
balance
balance
Set the WHITE BAL switch to PRST. The white
balance will be set automatically according to the
position of the FILTER control.
balance will be set automatically according to the
position of the FILTER control.
About white balance memory
The white balance values stored in memory will be
preserved even when the camera power is turned off.
There are two white balance memories, A and B.
When the AUTO W/B BAL switch is pushed to the
WHT side, the white balance will be adjusted
automatically according to the position of the FILTER
control. The adjusted value will be stored in the
selected memory. Each memory can store up to five
adjusted values, for a total of 10. The number of
values that may be stored in each memory can be
limited to 1, using the MAINTENANCE menu. In this
case, the value stored in the memory will not
correspond to the FILTER switch setting.
preserved even when the camera power is turned off.
There are two white balance memories, A and B.
When the AUTO W/B BAL switch is pushed to the
WHT side, the white balance will be adjusted
automatically according to the position of the FILTER
control. The adjusted value will be stored in the
selected memory. Each memory can store up to five
adjusted values, for a total of 10. The number of
values that may be stored in each memory can be
limited to 1, using the MAINTENANCE menu. In this
case, the value stored in the memory will not
correspond to the FILTER switch setting.
For settings using the MAINTENANCE menu, Refer to the
Installation & Maintenance Manual
Installation & Maintenance Manual
..........................................................................................................................................................................................................
1) Hunting
1) Hunting
The automatic iris responds over and over, and the image
repeatedly darkens and lightens.
repeatedly darkens and lightens.