Canon 600EX-RT User Manual
14
Install four AA/LR6 batteries.
1
Open the cover.
Slide the lock lever to the left as
shown in ", slide the cover down,
and open the battery compartment
cover.
shown in ", slide the cover down,
and open the battery compartment
cover.
2
Install the batteries.
Make sure the + and – battery
contacts are correctly oriented as
shown in the battery compartment.
contacts are correctly oriented as
shown in the battery compartment.
The grooves on the side surfaces of
the battery compartment indicate –.
This is convenient when replacing the
batteries in a dark place.
the battery compartment indicate –.
This is convenient when replacing the
batteries in a dark place.
3
Close the cover.
Close the battery compartment cover
and slide it up.
and slide it up.
X
When it clicks in place, the battery
compartment cover is locked.
compartment cover is locked.
Based on new AA/LR6 alkaline batteries and Canon’s testing standards.
The Quick Flash function enables flash shooting before the flash is fully
charged (p.16).
charged (p.16).
Installing the Batteries
Recycling Time and Number of Flashes
Recycling Time
Number of Flashes
Quick Flash
Normal Flash
Approx. 0.1 to 3.3 sec.
Approx. 0.1 to 5.5 sec.
Approx. 100 to 700 flashes
Using AA/LR6 batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
battery contact due to the irregular shape of the battery contacts.
If you change the batteries after firing flashes continuously, be aware that
the batteries might be hot.
the batteries might be hot.
COP
Y