Polaris PMS 419 User Manual

37

The ignition switch is a three-position, key-operated switch. Use the 
ignition switch to start the engine. See page 54 for starting procedures.

The key can be removed from the switch when it is in the OFF position.

Use the headlight switch to turn the lights on and 
off and to change the lights from high beam to low 
beam. The ignition switch must be in the ON posi-
tion to operate the headlights.

Press the top of the rocker switch toward the dash 
to place the headlights on high beam. Move the 
rocker switch to the center position to place the 
headlights on low beam. Press the bottom of the 
rocker switch to turn off the headlights.

The AWD Switch has two positions: 
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD).

Press the top of the rocker switch to engage All 
Wheel Drive. Press the bottom of the switch to 
operate in two wheel drive.

See page

 

40 for AWD operating instructions.

OFF

The engine is off. Electrical circuits are off, except accessory 12V.

ON

Electrical circuits are on. Electrical equipment can be used.

START

Turn the key to the START position to engage the electric starter. The key 

returns to the ON position when released.

HIGH

LOW

AWD

2WD