Polaris PMS 419 User Manual

54

1. Position the vehicle on a level surface outdoors or in a well-venti-

lated area.

2. Sit in the driver's seat and fasten the seat belt. Secure the cab nets.

3. Place the transmission in PARK.

4. Apply the brakes. Do not press the throttle pedal while starting the 

engine.

5. Turn the ignition key past the ON/RUN position to START. Engage 

the starter for a maximum of five seconds. Release the key when the 
engine starts.

6. If the engine does not start within five seconds, return the ignition 

switch to the OFF position and wait five seconds. Repeat steps 5 
and 6 until the engine starts.

7. Vary the engine RPM slightly with the throttle to aid in warm up 

until the engine idles smoothly.

NOTICE: Operating the vehicle immediately after starting could cause engine 

damage. Allow the engine to warm up for several minutes before 
operating the vehicle.

1. Release the throttle pedal completely and brake to a complete stop.

2. Place the transmission in PARK.

3. Turn the engine off.

1. Release the throttle pedal completely. (When the throttle pedal is 

released completely and engine speed slows to near idle, the vehicle 
has no engine braking.)

2. Press on the brake pedal evenly and firmly. Practice starting and 

stopping (using the brakes) until you're familiar with the controls.